FERROUSCLEAN

Effectively removes iron oxides acts as a rust remover. Advanced Rust Dissolving Formula.  FERROUSCLEAN penetrate and dissolves  iron oxide deposits from diesel cooling water systems while providing a temporary passivating film to protect the base metal from corrosion.

FEATURES

• Water-based cleaner
• Penetrates and disperses deposits
• Patented formulation
• Passivates
• No objectionable odor
• Contains emulsifiers and dispersing agents
• Contains antifoam
• Non-flammable

BENEFITS

• Easily disperses in water
• Decreases maintenance costs
• Increases equipment life
• Increases operating efficiency
• Dissolved deposits will not redeposit
• Effective removal of oxides
• Safe for use on aluminum, brass, copper, mild steel, and stainless steel
• Protects metallurgy from corrosion after cleaning
• Prevents flash rusting
• Can be used where there is light oil contamination or mineral scale trapped in the iron oxide deposits
• Low foam

PACKAGING
FERROCLEAN cleaning treatment is available in 25-liter pails (PCN 6675401)

MARINE - Cooling Water Rust cleaner from Cooling Water System. Highly effective water-based cleaner containing penetrating, dissolving and dispersing agents.
Classified as best Iron fouling CLEANER for cooling water systems.

Removal of iron oxide.  can negatively affect the overall operation of the system resulting in reduced operating efficiency, increased maintenance costs and downtime as well as shortened equipment life.

 

RXSOL-43-1011-025 ( FERROUSCLEAN) can be also used as a Rust spot cleaner.

A superior heavy duty and highly Concentrated liquid blend of surfactant & organic compound containing rust penetrating agent,   solubilizer  and inhibited phosphoric acid with ionic and non ionic emulsifier.

Not recommended for use on galvanized metal.

Dosage

FOR TANK CLEANING

RECOMMENDATION : 0.2% TO 100%
 

FIELD:-
specially designed for removal of rust from any steel surface area and rust stain from Brass, Copper, S.S wood, ceramic and aluminium surfaces, painted or not. And act as surface brightner.

Procedure for Use :-

• RXSOL-16-1011-025 is highly concentrate
• Dilute in water (always use a plastic jar and RXSOL-16-1011-025 should be added to  water  never add water to (RXSOL-16-1011-025.)
• The surface should be sound clean and free of oil, grease, dirt etc.
• Diluted materials apply on the rusted area for 15 to 20 minutes then wash off with water repeat if necessary.
  (For stubborn rusted stains.)

NOTE:-
For steel surfaces; remove oil, grease and old paint. Wet down entire surface with neat FERROUSCLEAN and allow to dry. The second wash may be necessary. The surface should have a grey/white appearance when the FERROUSCLEAN is dry. Steel surfaces will have a resistance to rust and will render a good base for paint.For removal of rust stains on painted surfaces and wood, FERROUSCLEAN should be applied at full concentration for heavy stains, or diluted to 20-50% for light stains. Allow to soak for 15 to 30 minutes and wash off with water. A second application may be necessary to remove the stubborn stains.

Spraying Direction:-
Using an empty/clean 210-litre drum, fill with 190 litres of fresh water and add 20 litres of FERROUSCLEAN   This makes a 10% solution, which can be sprayed onto areas in coated tanks where rust stains are showing and over actual rusted areas.  Once spraying is completed, wait 20-30 minutes and fresh water rinses with lots of water if possible use Butterworth machines for a more efficient result.  This method can be used in stainless tanks to “freshen up” the look of the stainless materials.  Make sure to rinse the tank very well, as residual detergent within the Metal Clean Bright will show up in a Wall Wash.
Injection – Not suitable.

Re-circulation:–
When hand spraying is inadequate (too much area to cover), prepare a 2% - 5% solution in the tank using fresh water, heat solution to 50^o C, then circulate the solution through Butterworth machines for 3 x 45 minutes drops minimum.  When using fixed machine recirculate for a minimum of 3 cycles.  Rinse out the tank using hot seawater 85^o C for 2 hours making sure that there is no form remaining in the water at the pump stack drain cock.  After the hot wash, the tank must be rinsed with fresh water and dried.

* If the mixture is allowed to overheat, it will soften epoxy/phenolic coating.
* Use a strainer at the pump stack when circulating any solution.

  Tank Lining – Stainless / Epoxy, Phenolic

Industrial Usage

Remarks

An advanced, water-based rust remover formulated to eliminate iron oxide deposits from diesel cooling water systems. Its formulation penetrates and dissolves stubborn rust and scale while dispersing loosened contaminants for effective removal. During cleaning, it forms a temporary passivating film that protects base metals from flash corrosion. The product ensures safe, efficient maintenance without strong odors or flammability risks.

Supply Locations

Ferrous Clean manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of FerrousClean at a competitive price from us. We have ready stock of FerrousClean in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.