Marine Growth Cleaner

RXSOL-25-4038-025  cleaning agent can perfectly clean off all kinds of marine fouling such as sticky matter and ooze attached to the surface of the plate without disassembling the plate heat exchanger.

RXSOL-25-4038-025 (Fouling Preventing Liquid ) is a very effective clear , yellowish green with , anti fungal based dispersing cleaner for the control of fouling by marine growth such as algae, shellfish, mussels, barnacles and micro-organisms and fungal growth in the sea water side of coolings systems. Due to its moleculer firm foaming properties, it also acts as a corrosion inhibitor.

Marine Growth Cleaner is an environmentally friendly, biodegradable, and non-toxic solution designed for the safe and effective removal of marine growth. Specially formulated for use on seawater-cooled equipment such as condensers, heat exchangers, and keel coolers, it provides a powerful alternative to harsh acids like muriatic acid—without fumes or foaming.

Marine Growth Cleaner easily dissolves barnacles, zebra mussels, rust, calcium, lime, and other mineral deposits. It can be re-circulated through systems without causing damage to equipment. The Ready-to-Use formula requires no dilution, making it a simple and reliable choice for both preventive maintenance and deep cleaning.

Physical Proeprties : 

RXSOL-25-4038-025 marine growth cleaner Antifouling Liquid  ensures the cleanliness of the heat exchange equipment, by dispersing the sediments and deposits of dissimilar substances falling into the system of water supply from the environment, such as sludges, sand, oil products, clays. The Rxsol Antifouling Liquid  the removal from the water supply system of dead organic materials, of natural origin, and enhances the action of microbiocides (oxidizing and non-oxidizing). Rxsol Antifouling Liquid is a weakly foaming compound and has a thermal stability, even at high temperatures (+ 120 0 C).
 

Rxsol Antifouling Liquid reduces the risk of Legionella Pneumophilla bacteria by effectively removing biofilms in the water supply system. When used in sterilizers and autoclaves, the reagent provides clean and shiny surfaces near the loaded glass containers, by emulsifying fats, oils, proteins and other organic residues.

• A/C & Refrigeration cooling Systems
• Engines Seawater Cooling Systems
• Heat Exchangers
• Bow Thrusters
• Water Makers
• Sea Strainers
• Propellers
• Seacocks
• Pumps
• Piping
• Hulls

Dosage

• Circulate product through the system using a pump.
• Allow it to run for 2–6 hours depending on the severity of fouling.
• Flush system with clean water after treatment.
• Repeat as necessary for heavily fouled systems.

RXSOL Antifouling Liquid may be supplied, directly from the product tank, or as an aqueous solution, to any suitable point in the water supply system. The exact dosage of Rxsol Antifouling Liquid will depend on a number of factors, such as the nature and concentration of suspended solids in the water, and the already existing degree of contamination of the internal surfaces. Preventive control of the technical state of the water supply system can be provided by dosing the reagent in the range 25-100 mg / l in continuous mode, or in a batch mode by the impact method. In water systems that are seriously polluted, the reagent should be cleaned in a concentration range of 1000 to 5000 mg / l. To receive special recommendations, customers should contact the official representatives of  Rx Marine International .

A suitable option, for specific heat exchange equipment, can be the equipment of local reagent injection points on incoming pipelines.

Notes

Regulatory and Legal Information: Please review the contents of the Safety Data Sheet or contact your authorized sales representative for any additional information, regulatory or environmental.

Safety: RX Marine International develops Material Safety Data Sheets for all chemical products of her production. The safety data sheet of a commercial product contains information concerning the protection of health and safety of production activities. Before starting the application of the reagent in your company, the supervisor should read the Safety Data Sheet and communicate the information therein to the attention of the subordinate staff.
 

Packaging : RXSOL Antifouling Liquid is supplied packed in PE canisters of 25 kg, in PE drums of 210 kg or in 1000 kg containers.

Key Features of Marine Barnacles Growth Cleaner

• Environmentally friendly – biodegradable and safe for marine ecosystems
• Non-foaming, odorless – unlike muriatic acid, no harmful fumes or unpleasant smell
• Effective on marine growth – removes barnacles, zebra mussels, algae, and more
• Dissolves mineral deposits – rust, calcium, lime, and scale
• Ready-To-Use – no dilution or mixing required
• Safe on metals – compatible with steel, copper, brass, and most alloys

Precautions

Very effective cleaner that is clear, yellowish green with anti fungal properties. Its a dispersing cleaner for the control of fouling smell by marine growth such as algae, shellfish, mussels, barnacles, micro-organisms and fungal growth in the sea water. Also effective in cleaning sides of cooling. 

Effective cleaner designed to remove marine growth, algae, and biological deposits from surfaces exposed to seawater. Restores metal and fiberglass surfaces to a clean, smooth finish. Safe for use on most marine equipment when used as directed. Ideal for hulls, sea chests, pipelines, and heat exchangers. Fast-acting formula reduces downtime and maintenance effort.

• Removes marine growth easily
• Restores surface cleanliness and shine
• Suitable for metal and fiberglass
• Fast and efficient cleaning action
• Reduces maintenance time

Supply location

Marine Ocean Growth Cleaner Antifouling liquid is available in various stock points such as Mumbai, Kandla, Gandhidham, Vishakhapatnam, Vizag, Ennore, Chennai, Kolkata, Dubai, Fujairah, Muscat, Ruwi, Ghala, Barka, Kenya, Uganda, Canada. 

Generic name

Keywords

Fouling attached to the plate is generally formed on the seawater side of the central cooler or oil cooler in low temperature operation (temperature below 40-50 degrees).