Slip Barrier Coats HOLD BLOCK

Polymer water Resist thin layer on HOLD surface not only helps to keep ship hold surface ready and clean after discahrging the cargo but also providing protective layer  from Hazardous cargo like Sulphur, Salt etc. Slip Barrier Polymer Coats HOLD BLOCK is providing thin layer on metal surface, which can be easily remove by high water pressure.  POLYMER BASED non-reactive coating materials which makes thin film barrier on the surface after dry. Due to the formation of RXSOL THIN barrier film on the surface, the cleaning operation after unloading becomes quicker and easier with optimum results.

• Protect metal against corrosive cargo
• Protect paint against cargo penetration
• Environmentally friendly
• Safe to  use in occupied / covered areas
• Reduces turn around times
• Easy to direct spray
• If hold cleaning is to be performed from tank top level only powerful equipment designed for cargo hold cleaning will do the job in a minimum of time.
• Effective cleaning chemicals that can dissolve stains and remove discoloring are required the crew needs to have effective  equipment to apply these chemicals from tank top level personal proactive equipment is required depending on type and condition of hold paint chemical that protect the paint may also be needed
• And don’t forget procedures  have to be drown up and your
• Crew  trained for the job Standardization of equipment and chemical onboard you ship will make life easier for your seaman and save your time

Slip Barrier Polymer Coats HOLD BLOCK is a  Heavy Duty protective Solution for hold of vessels,  which carrying corrosive and / or messy cargos  such as sulphur salt petcock coal and concentrates. It can be easily removed with it

Recommendation Dose for smooth surface : 
for Sulphur, Salt, etc        100 Ltrs/Hold for HANDYMAX & 150 Ltrs/Hold for PANAMAX
& for Petcoke, Coal, etc   200 Ltrs/Hold for HANDYMAX & 250 Ltrs/Hold for PANAMAX

This materials can be use directly with low pressure machine or manually by garden spray pump. in general practice on smooth & clean surface  each drums of 210 ltrs covers 2000 to 2500 sq meter while on rough and rusted surface require more quantities of materials.

 

Dosage

for HANDYMAX  (5 Holds) : In general  500 Ltr to 1000 Ltr   RXSOL-22-2210-210 require to cover area up to 12 mtrs , i.e approx 1/2 drum to 1 drum of material is sufficient for each hold , while
for PANAMAX    (7 Holds) : In general 1000 Ltr to 2000 Ltrs RXSOL-22-2210-210 require to cover full area. , i.e approx 3/4 drum to 1.25 drums of material is sufficient for each hold.

Notes

This Emulsion is safe to use , But as a precaution goggles & Protective gloves with mask require before use of this materials.

Precaution : 1 > Deposition of previous cargo /  Lime wash should be removed .
                     2 > Newly Painted surface should be fully cured.

Other Valuable Hold Cleaners :::

Cement Remover RX Hold ::: Highly concentrated and powerful penetrating agents materials which is effectively react with cement to loosen the bonding strength . Best results can obtain on dry surface of cement. RXSOL'S R & D has developed this molecular cement dissolver. Part No.- RXSOL-22-2202-025, Part No.- RXSOL-22-2202-020,  Part No.- RXSOL-22-2202-050

Precautions

Protective Chemicals suitable for both sulphur and petcoke cargoes.

Supply location

Slip Barrier Polymer Coats HOLD BLOCK supplier in all major port of India and Middle East. We are keeping ready stock at Kandla, Mundra, Sikka, Navlakhi, Hazira, Mumbai, JNPT, Visakhapatnam, Gangavaram, Chennai, Ennore, Kolkata, Haldia, Paradip, Fujairah, Dubai, Sharjah, Abu Dhabi. Slip Barrier Polymer Coats HOLD BLOCK also works as surface releasing agent and due to its chemicals resitance nature protect metal surface of ship from hazardous cargo.

Generic name

Keywords

Slip Barrier Coats HOLD BLOCK is a Heavy Duty protective Solution for the hold of vessels which carrying corrosive and / or messy cargos such as Sulphur, Salt, Petcoke, coal and concentrates. It can be easily removed after discharging of cargo .
FEATURES AND BENEFITS:...................................
$ Protects metal against corrosive cargo.
$Safe on all coatings, and to the personnel handling it.
$ Protects paint against cargo penetration.
$ Environmentally friendly.
$ Safe to use in occupied / covered areas.
$ Reduces turn around times.
$ Easy to Direct Spray.
 

Other Important materials, which help to control corrosion on the metal surface. Chemically SULPHUR producing STRONG acid in presence of  moisture under excess of temperature, Freshly prepared acid during the reaction rapidly damaging steel surface. This can be prevented by ACID neutralisation method. RXSOL BILGE COAT is specially meant to solve this issue. For more details of product, You may click here to know more details about product and using procedures.

RXSOL Bilge Coat (Sulphur Acid Neutralizer)  Acts as Acid Neutralizer formed during sulphur voyages.