RustoCIDE

RUSTOCIDE is a Specially designed for removal of rust from any steel surface area and deposits. Also acts as SURFACE BRIGHTNER.  Superior heavy duty and highly Concentrated liquid blend of surfactant & organic compound containing rust penetrating agent, solubilizer and inhibited with rust dissolving acid.

RUSTOCIDE is a single component sulfate and chloride-free liquid, which in one operation removes rust and prevents further rusting of steel.

* If the mixture is allowed to overheat, it will soften epoxy / phenolic coating. *

Use a strainer at the pumpstack when circulating any solution. Tank Lining – Stainless / Epoxy, Phenolic

Product Properties:-

Characteristics:-

• Non-flammable.
• Prevents further rusting.
• Economical , cost effsctive.
• Surface brightening
• Protects and maintains from corrosion
• Acts as rust proofing agent before the application of paints or coatings.
• It doesn’t affect rubber and plastic compounds

Note:- When cleaning aluminium, brass & copper flush with water upon completion of cleaning

Dilutions must be made in a plastic container. The acid should always be added to water, never the reverse.

To clean surfaces after welding or rusted surfaces use 50% Rust Remover-Water solution.

To remove stain or rust from brass and copper surfaces use between 20 – 50 % solution and rinse it with water after 15 –40 minutes.

On aluminum surfaces use 10 – 30% Metals Rust stain metal bright surface Cleaner -Water solution and after 5 minutes rinse it with water.

To remove rust from painted surfaces use 20 – 30% Metals Rust stain Brites surface Cleaner -Water solution and rinse with water after 15 - 40 minutes

To remove rust remains from ceramic, porcelain and glass surfaces; use 20 – 50% Rust Remover-Water solution for 20-40 minutes and rinse it with water.

To remove light cement and lime use 50% Rust Remover-Water solution and after 30 – 40 minutes rinse with water.

To remove rust in the pipelines and tanks use 5% Metals Rust stain Brites surface Cleaner -Water solution and circulate. On the other hand, if you use injection method use 3-5% Metals Rust stain Brites Cleaner -Water solution. Both circulation and injection must continue until the rust is removed.

Brushing is recommended for heavy rusty surfaces.

Dosage

Procedure for Use:-RXSOL-15-1011-210 is highly concentrate

Dilute in water (always use plastic jar and RXSOL-15-1011-210 should be added to water never add water to RXSOL-15-1011-210.)

Surface should be sound clean and free from oil, grease, dirt etc.

Diluted RUSTOCIDE apply on rusted area for 15 to 20 minutes then wash off with water repeat if necessary. (For stubborn rusted stains.)

Spraying Direction: – Using an empty / clean 210 liter drum, fill with 190 liter of fresh water and add 20 liters of RUSTOCIDE Metals Rust stain Brites Cleaner This makes a 10% solution, which can be sprayed onto areas in coated tanks where rust stains are showing and over actual rusted areas. Once spraying is completed, wait 20-30 minutes and fresh water rinse with lots of water, if possible use butterworth machines for a more efficient result. This method can be used in stainless tanks to “freshen up” the look of the stainless materials. Make sure to rinse the tank very well, as residual detergent within the RUSTOCIDE Metals Rust stain Brites Cleaner will show up in a Wall Wash.

Injection– Not suitable.

Re-circulation: – When hand spraying is inadequate (too much area to cover), prepare a 2% - 5% solution in the tank using fresh water, heat solution to 50o C, then circulate the solution through butterworth machines for 3 x 45 minutes drops minimum. When using fixed machine recirculate for a minimum of 3 cycles. Rinse out the tank using hot seawater 85o C for 2 hours making sure that there is no form remaining in the water at the pumpstack drain cock. After the hot wash, the tank must be rinsed with fresh water and dried.

Notes

RUSTOCIDE is Specially designed for removal of rust from any steel surface area and rust stain from Brass , Copper , S.S wood , ceramic and aluminium surfaces , painted or not . And RUSTOCIDE acts as surface brightner.
RUSTOCIDE is vastly used for polishing almost all metals, such as brass, copper, nickel, chrome, stainless steel, aluminium and even for machinery and golf clubs.

Precautions

RustoCIDE is Rust Cleaning detergent with advanced formulation with Non Ionic Detergent and Mixture of Inhibited Acid.

Useful area

Metal Brights Cleaner HD  

Supply location

RUSTOCIDE largest supplier in Mumbai, Navi Mumbai, Fujairah, Abu Dhabi, Sharjah, Dubai, Kandla Mundra, Chennai, Ennore, Gangavaram, Visakhapatnam, Kolkata, Haldia, Paradip, Muscat Oman Barka, Nairobi Mombasa Kenya Africa, Sudan, Yemen, Canada

Generic name

Keywords

Rustocide manufacturer supplier in Mumbai, Navi Mumbai, Kandla, Gandhidham, Vadodara, Ahmedabad, Bangalore, Chennai, New Delhi, Gandhidham, Goa, Hyderabad, Kolkata, Mumbai, Nagpur, Pune, Surat.

Buy Rustocide directly from our MANUFACTURING FACTORY in Fujairah, Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Al Quwain, UAE Middle East.

Rustocide manufacturer supplier in Muscat Barka Oman, Salalah, Sohar, Ruwi, Oman.

Rustocide manufacturer distributor supplier in Nairobi, Mombasa, Kenya Africa, Sudan, Yemen.

Rustocide manufacturer supplier distributor in Canada BC, USA.