Fluorescein Liquid Dye RXSOL  is a water-based fluorescent tracer dye that meets the minimum biodegradation requirements, removing the need for a substitution warning unlike the standard fluorescein leak tracing dyes. Fluorescein Liquid Dye Rx  provides a fluorescent colour which is visible to the naked eye and can be detected subsea by cameras, fluorimeters calibrated to the appropriate excitation / detection wavelength
.
Fluorescein Liquid Dye Rx  is lower in toxicity towards operatives and marine organisms than other leak testing dyes, such as Rhodamine and is non-hazardous for supply and transportation.It is compatible with RXSOL Hydrotech 367 RX corrosion inhibitors and oxygen scavengers.

Fluorescein Liquid Dye RXSOL   is a commonly used dye for hydro test operations .Fluorescein Liquid Dye RXSOL   is a brown liquid which produces a red / pink solution once diluted in water. The solution then produces an orange fluorescence when excited with a blue or green light. For subsea detection of Fluorescein Liquid Dye RXSOL, an optimum excitation wavelength  should be used.

Dosage

Normal dose for application is approximately 100 ppm. Rx Marine  can not stipulate an exact dose for Fluorescein Liquid Dye RXSOL . This is due to the strength of colour required being determined by a number of scenarios e.g. style and sensitivity of detection apparatus, sea bed depth and tidal currents. Generally, as a rule of thumb, the dye must not be dosed at below 100ppm for visual detection.
Detection of Fluorescein Liquid Dye RXSOL has been proven using the  Leak Detection Systems.

Notes

Handling :

No special procedures need to be observed. Normal precautions should be taken and protective clothing,
goggles and PVC/rubber gloves should be worn.

Packing : Available in 25 Litre, Pail, 210 Ltrs drums, 1,000 litre IBC’s capacity.

Precautions

Fluorescein Liquid Dye RX – Product Details

Fluorescein Liquid Dye RX

Water-Soluble Fluorescent Tracer Dye for Leak Detection, Water Testing & Industrial Applications

Fluorescein Liquid Dye RX is a concentrated fluorescent water-soluble dye designed for water tracing, leak detection, flow visualization and industrial water-system identification. When diluted in water, fluorescein produces a highly visible yellow-green to green fluorescent coloration, particularly under suitable UV or blue-light illumination.

The product is useful for maintenance, inspection and troubleshooting applications where visual identification of water movement, leakage or circulation is required.

Product Name: Fluorescein Liquid Dye RX
Product Type: Fluorescent Liquid Tracer Dye
Physical Form: Liquid
Color: Fluorescent yellow-green/green when diluted
Solubility: Water soluble
Brand: RXSOL
Applications: Water tracing, leak detection, flow visualization, industrial and marine maintenance

Key Features

• Highly visible fluorescent tracing effect

• Water-soluble liquid formulation

• Useful for detecting water movement and leakage

• Suitable for flow-path identification

• Helps identify difficult-to-locate leaks

• Useful for industrial and marine maintenance

• Can be observed under suitable UV/blue light

• Suitable for controlled water-system testing

Applications

1. Leak Detection

Fluorescein Liquid Dye RX can be used as a tracer to help locate suspected leakage in suitable:

• Water pipelines

• Cooling-water systems

• Tanks and reservoirs

• Drainage systems

• HVAC water circuits

• Industrial water systems

• Marine water systems

The dye follows the water path, making leakage or unexpected water movement easier to identify.

2. Water Flow Tracing

The fluorescent dye can help maintenance personnel visualize water circulation and identify:

• Flow direction

• Unexpected flow paths

• Dead zones

• Circulation problems

• Cross-connections

• Drainage routes

3. Marine Applications

Fluorescein Liquid Dye RX can be useful for controlled marine maintenance and troubleshooting applications involving:

• Seawater systems

• Cooling-water circuits

• Bilge/drainage investigations

• Tank and pipe tracing

• Water-flow identification

• Leak investigation

4. Industrial Water Systems

The product may be used for troubleshooting and inspection of suitable:

• Cooling systems

• Process-water circuits

• Water tanks

• Piping networks

• Drainage systems

• Industrial equipment

How Fluorescein Works

Fluorescein is a fluorescent tracer. After introduction into a suitable water system, the dye travels with the water. Its characteristic yellow-green fluorescence makes the water path easier to observe, particularly when suitable illumination is used.

This makes it useful when conventional visual inspection cannot easily identify the source or route of water movement.

Supply location

Packaging & Supply

Fluorescein Liquid Dye RX can be supplied in suitable industrial packaging depending on customer requirements, application and availability.

Supply: India | UAE | Oman
Applications: Marine | Industrial | HVAC | Water Systems | Leak Detection | Flow Tracing

Safety

Handle according to the current RXSOL SDS. Avoid unnecessary contact with eyes and skin and use appropriate PPE during handling. Prevent uncontrolled release to drains or natural waterways unless the product and application are specifically approved for such discharge.

For exact concentration, dosage, specifications, packaging and regulatory status, refer to the current RXSOL TDS/SDS/COA for the supplied batch.

Fluorescein Liquid Dye RX, Fluorescein liquid dye, fluorescent tracer dye, fluorescent leak detection dye, water tracing dye, leak detection chemical, fluorescent water dye, industrial tracer dye, marine tracer dye, water flow tracing chemical, fluorescent dye supplier, fluorescein dye India, fluorescein dye UAE, fluorescein dye Oman, RXSOL fluorescent dye.

Fluoroscent Greenish orange liquid manufacturer and supplier in Fujairah, Dubai, Sharjah, Abudhabi, Ajman, Muscat Barka Oman, Mumbai, Gandhidham, Chennai Ennore, Visakhapatnam, Kolkata, Paradip India, Sudan, Yemen, Nairobi Kenya Africa

Generic name

Keywords

Advantages

• Easy visual identification

• Effective at low concentrations depending on application

• Useful for troubleshooting complex water circuits

• Helps reduce time spent locating water leaks

• Suitable for temporary tracing applications

• Useful for maintenance and inspection teams

Typical Application Procedure

1. Identify the water system or area requiring tracing.

2. Introduce an appropriate quantity of Fluorescein Liquid Dye RX into the water.

3. Allow sufficient circulation time for the dye to distribute.

4. Inspect suspected leakage points, outlets, drains and circulation paths.

5. Use suitable UV/blue-light illumination where required.

6. Flush or replace the system water after testing when necessary.

Dosage should be determined from the current RXSOL TDS and the specific application. Factors such as water volume, background color, turbidity, system type and required visibility can affect the amount of dye required.

Important Compatibility Considerations

Before using the dye in a sensitive process or discharge system, confirm:

• Compatibility with the process water

• Compatibility with membranes, filters and coatings

• Environmental/discharge requirements

• Any downstream equipment sensitivity

• Required flushing procedure after testing

Do not assume that a tracer dye is suitable for drinking water, food processing, pharmaceutical manufacturing or environmental discharge merely because it is water soluble. The appropriate grade and regulatory approval must be confirmed for those applications.

Fluorescein Liquid Dye RX Supplier

RXSOL supplies specialty chemical products for marine, industrial, water-treatment and maintenance applications. Fluorescein Liquid Dye RX can be considered for customers requiring a fluorescent tracer for controlled water-flow and leak-detection applications.