Penitrating oil / "Unispec penetrating oil",Ardrox 9881
- Description
- Technical Specs
- Application
- Industrial Usage
- Dosage
- Usages
- Related Info
- Bulletin Details
A very strong cleaner, which can be used to soften up / remove baked on drying oils and Hard coke asphaltic deposition etc. It is low toxic product with an exceptional solvency power on soil & oily matter . It is minimizes the extreme hazards to personnel in handling materials.
Apply this to loosen frozen bolts, fittings and nuts. Cuts red or white lead, rust, grease, tar, carbon and graphite with special ingredients to help prevent further corrosion. Safe on basic metals. Works well with countersunk bolts also.
Characteristics :-
- Removes grease, oil, carbon deposits, soil and grime.
- Keeps loosened deposits in suspension preventing re-deposition.
- Low toxic., Non-flammable.
- Free from hydrocarbon solvents.
- Effective and economical in use , Water-based cleaner.
- RXSOL PENETROSOSL has numerous cleaning applications including removal of greases, waxes, oil, sludge, soot, carbon deposits and general dirt and grime.
- Non-corrosive to ferrous metals. Suitable for all tank-coatings.
- Can be used for gas and hydrocarbon freeing of tanks.
- Can be used for deodorizing
- Contains wetting agents.
Technical Information
| Appearance: Clear Liquid | Solubility: Insoluble | |
| Solids: 100% | Odor: Solvent | |
| Density: 7.6 Lbs./Gal. | pH Level: NA | |
| Stability: Good |
Flash Point: 250oF |
USING-PROCEDURE :-
The most economical method of using RXSOL PENETROSOL is by direct injection followed by recirculation washing, using tank cleaning machines.
Spraying Method :-
Using PENETROSOSL as delivered in drums, spray onto areas where residue remains following rough washing leave for 10-45 minutes (but do not allow to dry), and warm water 60oC for at least 3 hours
**Make sure to take all safety precautions are followed when handling / spraying PENETROSOSL **
Injection Method – not applicable.
Re-circulation Method :–
If there is no drop line, then lower butterworth hoses into the tank from the pump stack header without machines attached and circulate through these hoses while you fill the solution material.
-
Use a strainer at the pump stack when circulating any solution.
SURFACE Lining – Stainless / Epoxy / Phenolic
Apply to surface and allow to soak and penetrate for 5 minutes. Attempt to open. If resistance to opening persists reapply penetrating oil and allow to soak.
RXSOL PENETROSOL
RXSOL-16-1020-025
General description
Penetron Plus is a fast acting liquid compound containing special oils and solvents that penetrate iron oxides and loosens carbon deposits. Penetron Plus loosens corroded parts as nuts, bolts, etc.
Features
• Liquid oil based product
• Low-toxic, emits no toxic fumes or vapours
• Fast acting penetration of rusty seized up parts
• Helps to avoid cutting or burning off bolts from engines or machinery
• Keeps tools clean and rust free
• Dismantling of assemblies seized up from rust and soiling
• Cleaning of rusty and soiled metal parts
• Protection of machinery parts and tools
Ordering Information
| Product number | Product name |
| RXSOL-16-1020-025 | Penetrosol |
Directions for use
Penetron Plus can be applied by brush, spray, spout from can or used in a soak tank.
For nuts, bolts and other corroded parts a few drops of Penetron Plus on the thread and nut is usually sufficient to free a seized thread.
Small rusty and soiled parts can be immersed in a tank, to remove rust scale and soiling i.e. grease, tar and oils.
Use a brush or spray to prepare larger machinery parts for dismantling, to free nuts and bolts and clean parts.
For protection against rust, brush or spray a coating over parts to be protected.
Always use Penetron Plus neat.
Sampling and testing Penetron Plus loosens corroded parts as nuts, bolts, etc.
Documentation
SDS
RXSOL PENETROSOL
Further Technical Data
Form Liquid
Appearance Clear red
Density 0,8
Flash Point Above 61
Not Compatible Do not use with natural rubber
