Corrosion Inhibitor Zinc Based
For the latest, most accurate MSDS, email us at muscatchem @ gmail.com.
RXSOL OC is Corrosion Inhibitor OPEN Cooling water circulation System. Phosphates and zinc stabilizer for anti-scale / anti-corrosion water treatment formulations. Also demonstrates excellent efficiency in the presence of soluble iron where acrylic polymers fail. Excellent dispersant for iron oxides.
Corrosion Inhibitor Zinc Based is a high-performance multi-component corrosion inhibitor system based on zinc chloride and phosphonic acid chemistry. The product provides dual-mode protection through anodic passivation and phosphonate adsorption film formation, offering effective corrosion control in aqueous industrial systems.
It is designed for use in closed loop cooling systems, industrial water circuits, hydrostatic testing fluids, and process water systems where both corrosion and mild scaling tendencies are present.
SCALE & CORROSION INHIBITOR FOR HIGH STRESS COOLING WATER SYSTEM...
Key facts
- Product
- Corrosion Inhibitor Zinc Based
- Part No.
- RXSOL-40-4029-025
- Category
- Sewage Chemicals Treatment
- Also known as
- Corrosion Inhibitor for Open Cooling Circulating System, ROCOR OC, TRASAR 3DT 250, Corrosion Inhibitor with Zinc salts and Polyphosphates, Corrosion Inhibitor Zinc Based, M-2154 SCALE & CORROSION INHIBITOR FOR HIGH STRESS COOLING WATER SYSTEM, Acumer 3100
- Supplier
- Muscat Chemical, Barka, South Al Batinah, Oman
- Delivery
- Muscat, Sohar, Salalah, Duqm, Nizwa, Sur, Barka and Gulf ports
- Documents
- MSDS (PDF); TDS on request
- Pricing
- Quote on request — contact us or WhatsApp +968 77333599
| Property | Specification |
|---|---|
| Appearance | Clear to light amber liquid |
| Odour | Mild acidic |
| pH (as supplied) | 3.0 - 5.5 |
| Specific Gravity (25°C) | 1.25 - 1.45 |
| Solubility | Completely miscible in water |
| Flash Point | Non-flammable |
| Stability | Stable under normal storage conditions |
Corrosion Inhibitor OPEN Cooling System scientifically formulated to keep clean open recirculating systems and also prevent from scale formation . Chemically Corrosion Inhibitor OPEN Cooling System will disperse scale and corrosive products, silt etc and can be used as an anti-foulant along with other treatments.
Excellent scale inhibition for a variety of applications including cooling circuits, boilers and RO units.
It is widely used in Boilers, cooling water and membranes
Where can RXSOL Corrosion Inhibitor Zinc Based be used?
- Closed loop cooling water systems
- Industrial heat exchangers and chillers
- Hydrostatic testing of pipelines and vessels
- Temporary rust protection of metal surfaces
- Process water systems in chemical and petrochemical plants
- Equipment storage preservation fluids
Dosage
RXSOL OC is Corrosion Inhibitor OPEN Cooling water circulation System is highly concentrated cooling water treatment product, Its small dosage from 0.5 – 1 liter per 10 Tons of Cooling Water. The source of water also directly affecting its dosage as The dosage depends on the quality of the supply water ( Total hardness and Chloride content as low as possible) . Control is by simple colourismetric test.
Optimum result of COOLING SYSTEM can be obtained by maintaing pH level 8 to 8.5 and Total phosphate level should be maintained between 20 and 30 ppm.
Feel free to ask for RXSOL PHOSPHATE TEST KIT, RXSOL HARDNESS TEST KIT, RXSOL CHLORIDE TEST KIT. We are keeping full range of TEST KIT.
DOSAGE BASED ON ZINC LEVELS
ACTIVE ZINC value in system after dosing should be maintained at 1 to 5 ppm.
Therefore, total product dosage must be in the range of 20-80 ppm to prevent scaling and corrosion
Correct dosage can be understood taking into account water quality and other factors.
Rapid protection against corrosion is achieved by pre-treating the system with between three and five times the normal maintenance dosage for seven to ten days. The maintenance dosage is then applied to the recirculating water at all times.
Notes
RXSOL OC is Corrosion Inhibitor OPEN Cooling water circulation System compatible with nylon, neoprene or rubber jointings.
- Dual mechanism corrosion protection (inorganic + organic film formation)
- Rapid formation of protective zinc passivation layer
- Strong adsorption on steel and alloy surfaces via phosphonate groups
- Provides scale inhibition (calcium carbonate control)
- Effective in low to moderate hardness water systems
- Compatible with common industrial water treatment programs
- Suitable for short-term and long-term corrosion protection
- Works in both static and circulating systems
Supply location
RXSOL OC is Corrosion Inhibitor OPEN Cooling water circulation System Liquid manufacturer and supplier in Mumbai, Turbhe Pawana MIDC, Gandhidham, Visakhapatnam, Chennai Ennore, Kolkata, Haldia, Ajman, Fujairah, Dubai, Sharjah, Dubai, Muscat, Oman, Sohar, Barka, Canada, SUDAN, Yemen