Super Degresol-CP X Cell 54, 651 571430, COLD CLEAN WASH HD, Eazy Degreaser, ColdWash, Cold Wash 25 Ltr
- Description
- Technical Specs
- Application
- Industrial Usage
- Dosage
- Usages
- Related Info
- Bulletin Details
AVOID contact of RXSOL-20-2003-025 with skin or eye Contact. If contact occurs wash with ample quantity of water. NOTE : on dilution RXSOL-20-2003-025 is more effective and safe for use on epoxy, polyurethane, zinc-silicate coatings and stainless steel.
Advantages :
RXSOL-20-2003-025 is easily soluble in water Action is quite fast even at low temperature which gives advantages of cleaning under operation And avoid shut down and down time.Non corrosive to most of the metals / plastics. Gives clear finish to the surface .Lower cost due to high concentration
| Appearance | Clear amber brown liquid | |
| Density | In g/cm3 at 15°C: 0.95b | |
| Flash Point | Above 70°C ( on dilution with water more than 90°C ) | |
| Compatibility | ||
| Metal | No known effect | |
| Rubber | May swell | |
| Synthetic rubber | May swell | |
| PACKAGING | Order No: RXSOL-20-2003-CW | Size (in litres): 25,/30,/210 |
Ready to use for tank cleaning or general degreasing.
Complete removal of dirt, oil, carbonized grease, heavy oil, gum, vegetable oil, Lube oil, soot, asphalt, paraffin, carbon stains etc. Gives clear finish to the surface. Highly effective for the removal of crude and other high melting point stains.
#Cold_WashTANKCLEANER_DUBAI
#Cold_WashTANKCLEANER_MUMBAI
#Cold_WashTANKCLEANER_MUSCAT
#Cold_WashTANKCLEANER_KANDLA
#Cold_WashTANKCLEANER_KOLKATA
|
SPRAY METHOD |
Mix 1 part of RXSOL-20-2003-CW with 2 -10 parts of water / GAS-OIL ( For heavy oil,greasy surface use directly)Spray directly on the entire surface to be cleaned. This can be achieved by Hand spray / mechanical spray pump. Immediately after 2 -5 minted of spray the RXSOL-20-2003-CW starts its function. The Dirt, oil grease etc will loosen. 5 to 6 minutes after spraying start rinsing the system with water (High pressure recommended). Dirt and mud starts vanishing with cleaning media and water |
|
Immersion Method |
Application in immersion process with or without ultrasonic support, manual wipping. |
|
RE-circulation Method |
RXSOL-20-2003-CW is also used in conjunction with alkaline degreasing bath at 2-10% (v/v) concentration for better and quick degreasing action. Eithers the bath is heated to be 70°Cor the solution can be stirred or air agitated. FINALLY RINSE THE SYSTEM WITH FRESH WATER. |
Chemical for Maintenance of Industrial and Institutional physical plants for handle really tough daily cleaning problems. Can be used as a stripper for all types of waxes and finishes and as a Degreaser where regular cleaners will not perform. Maybe brushed on, sprayed or used in a dip tank.
Chemical for Maintenance of Industrial and Institutional physical plants for handle really tough daily cleaning problems. Can be used as a stripper for all types of waxes and finishes and as a Degreaser where regular cleaners will not perform.
HEAVY DUTY COLD WASH / SUPER DEGRESOL-CP
RXSOL-20-2003-025
Introduction:
RXSOL-20-2003-025 is a unique formulation blended with oxidized fatty Compound and high flash point solvents( due to that can be used undiluted upto 70°C) with powerful dispersing agent along with ionic and non ionic surfactant . OB1005 is readily soluble in water in all proportions.RXSOL-20-2003-025is non- corrosive to metal like copper, aluminium, Mild steel, and plastic.It is non toxic which makes handling easy.
Functions:
Complete removal of dirt, oil, carbonized grease, heavy oil, gum , vegetable oil , Lube oil, soot , asphalt ,paraffine, carbon stains etc. Gives clear finish to the surface. Highly effective for the removal of crude and other high melting point stains.
PROEDURE OF USE :
|
SPRAY METHOD |
Mix 1 part of RXSOL-20-2003-025ith 2 -10 parts of water / GAS-OIL ( For heavy oil,greasy surface use directly)Spray directly on the entire surface to be cleaned. This can be achieved by Hand spray / mechanical spray pump. Immediately after 2 -5 minted of spray the RXSOL-20-2003-CW starts its function. The Dirt, oil grease etc will loosen. 5 to 6 minutes after spraying start rinsing the system with water (High pressure recommended). Dirt and mud starts vanishing with cleaning media and water |
|
Immersion Method |
Application in immersion process with or without ultrasonic support, manual wipping. |
|
RE-circulation Method |
RXSOL-20-2003-CW is also used in conjunction with alkaline degreasing bath at 2-10% (v/v) concentration for better and quick degreasing action. Eithers the bath is heated to be 70°Cor the solution can be stirred or air agitated. FINALLY RINSE THE SYSTEM WITH FRESH WATER. |
PRODUCT PROPERTIES:
| APPEARANCE | Clear amber brown liquid | |
| DENSITY | In g/cm3 at 15°C: 0.95b | |
| FLASH POINT | Above 70°C ( on dilution with water more than 90°C ) | |
| COMPATIBILITY | ||
| Metal | No known effect | |
| Rubber | May swell | |
| Synthetic rubber | May swell | |
| PACKAGING | Order No: RXSOL-20-2003-025 | Size (in litres): 25,/30,/210 |
Advantages :
RXSOL-20-2003-025easily soluble in water Action is quite fast even at low temperature which gives advantages of cleaning under operation And avoid shut down and down time.Non corrosive to most of the metals / plastics. Gives clear finish to the surface .Lower cost due to high concentration
Fields of Application :
Treated for the really tough daily cleaning problems faced in the proper Maintenance of Industrial and Institutional physical plants. Can be used as a stripper for all types of waxes and finishes and as a Degreaser where regular cleaners will not perform. May be brushed on , sprayed or used in a dip tank . Excellent for use as a wash for fuel tankers & as a liquid steam jenny compound.
Caution :
AVOID contact of RXSOL-20-2003-025with skin or eye Contact. If contact occurs wash with ample quantity of water. NOTE : on dilution RXSOL-20-2003-CW is more effective and safe for use on epoxy, polyurethane, zinc-silicate coatings and stainless steel.
