Air Cooler Scale Dissolver

Air Cooler Scale Remover Cleaner Sea Water SIDE is specialized product to dissolve water scale smoothely. We are manufacturer and supplier of Air Cooler Cleaner Sea Water SIDE.

Procedure-of-use: The most effective descaling is accomplished by circulation.In the case of small components,the soak method in an immersion bath can be used. If the equipment to be cleaned is contaminated by oil, grease or sludge, then pre-cleaning with DEGREASER ( RXSOL OB 1005 ) is necessary. Depending on the extent of scaling, use a solution of 2.5-10% RXSOL-54-1008-025 . The solution will have a red colour which changes to orange when 85% of the acid has been neutralized , & to colourless  when the solution is totally neutralized. Whenever possible, the solution should be heated to 60°C.Neutralised  solutions can be re-activated by adding more RXSOL-54-1008-025  until the red colour reappears. 

Fields: Descaling of  Boilers, Descaling  of Diesel Engine Cooling Systems, Condenser, Pipeline collection system, Evaporators, Calorifiers, Heat Exchangers,The strength of the acid can be enhanced by adding 1part sodium chloride (common salt) to 20 parts of Descalex.If salt is not available, an acceptable alternative is to dissolve RXSOL-54-1008-025  in sea water. After use of RXSOL-54-1008-025  a  0.5% solution of Alkalinity Control in fresh  water should be used for neutralization.

RXSOL-54-1048-020  is mixed with fresh water 3 to 20 percent depending on deposition of scaling.

If the equipment to be cleaned is contaminated by oil, grease, sludge or carbonized oil, then first of all clean the system with degreaser  RXSOL-10-1005. RXSOL-54-1048-020 should be mixed with fresh water to form a solution of 10-30%, depending on the extent of scaling. After using RXSOL-54-1048-020 ,  

PRECAUTION :::it is essential to thoroughly rinse all metal surfaces at least once with a 0.5% solution of  RXSO-20-2005  in fresh water. This solution should be circulated for 2-4 hours or until an acceptable pH value is obtained. This will neutralize any remaining acidity & passivate steel surfaces.

Dosage

After using  RXSOL-54-1048-020, sense all metal surfaces with 0.5 percent of  RXSOL-10-1005, at least 2-4 hour , up to neutral of PH value.

• Fast and effective scale remover.
• Soft on ferrous metals.
• Removes water scale & rust from boilers/diesel engine & other cooling system
• As well as from condensers, evaporators, & heat exchangers etc
 

Why Use RXSOL Descaler?

• It is a safe , economical concentrated  chemical to be used on the waterside of heat transfer equipment.
• You do not have to heat RXSOL-54-1048-020 .
  RXSOL-54-1048-020  is safer for the employees to use than other acid products.
• Your equipment will be cleaned in only hours without disassembling any part of the equipment. Equipment can also be cleaned without any down time (cleaning on the run).
•  Cleans down to the original surface without pitting.
•  RXSOL-54-1048-020 is safe on copper, copper-nickel, bronze, brass, iron, stainless steel and rubber.
•  RXSOL-54-1048-020  will extend the usable life of your equipment, especially when used as a part of a regularly scheduled preventative maintenance program.
•  Removing the scale build up allows your equipment to operate more efficiently with less down time.
  
   

Useful Area

Why is Dismantling essential before CHEMICAL CLEANING operation ?
Dismantling of both ends and internal parts, separation from the recirculation chamber is most important, and before initiation leakage testing are common procedures for any tube heat exchangers.

Ans : Unexpected consequences can happen where tube walls have weakened due to long and continuous running and deposition of scale and water dissolved mineral chemical reaction. During reactive cleaning, chemical cleaning eliminates all depositions that can result in puncture to the tubes where tube walls have weakened due to scale deposition and reaction.

 

Industrial Usage

#AirCOOLERcleaner_supplier
#AirCOOLERcleaner_manufacturer
#AirCOOLERcleaner_Mumbai
#AirCOOLERcleaner_Chennai
#AirCOOLERcleaner_Dubai
#AirCOOLERcleaner_Muscat

Bulletin Details

Dirt in tubes of seawater side

White scales attached on the seawater side of air coolers of many vessels. We found that in most cases, the main component of the scales is calcium carbonate and there is also a small amount of calcium sulfate. Therefore in most cases, if you dissolve the calcium carbonate the scales will be removed.

However, if the amount of scales is large enough to block the tube, the cylindrical scale will usually have calcium carbonate on the outside (the side that is in contact with tube) and calcium sulfate in the center (part that seawater passes through). Calcium sulfate is easier to be formed when the temperature goes higher.

When the amount of scales increases, the contact area of scale and cleaner is very small and a longer time of dissolution is required. Calcium sulfate cannot be dissolved by an acid cleaner.

RXSOL-54-1048-020 is a powerful dissolving agent of calcium carbonate. Therefore, it is better to use RXSOL-54-1048-020  to do circulating cleaning at an early stage before the scales build up and block the tube, or regular cleaning is recommended as well. It is impossible to do a circulating cleaning when the tube is completely blocked.

Also Suitable for SCALE REMOVAL of BOILER and Cooling Water

Scales are very damaging to the boiler because they interfere with the heat transfer and can lead to overheating and eventually, boiler rupture , To increas usable life of cleaned equipment , it is safe and effective way to remove scale deposits from all types of water-cooled and water-heated equipment. This descaler specifically formulated and developed to rapidly clean mineral scale from passages in water-cooled or heated equipment. It improves Plant Efficiency, Lowers Cost, Conserves Energy, Decreases Down-Time.

Chemically react with and decompose Calcium, Magnesium deposited Salts. Suitable for pipeline, boiler, HVAC, Heat Exhanger, Condenser, Evapourator, Chiller, Compressor and etc.     Specifically formulated to remove rust and water scale build up from boiler evaporators, heat exchangers, cooling systems, pipeline collection system etc. Highly effective on heating. Safe and easy handling and storage . Fast and effctive scale remover .

-   Non-combustible
-   Smoke from fires is irritating
-   Not flammable. In case of fire use extinguishing media appropriate to surrounding conditions
-   Prevent run off water from entering drains if possible
-   Non-poisonous ::: It does not contain toxic cresols or other tar oils that Require SARA Title III, Section 313 spill loss or disposal.
Non-polluting, Non-corrosive.


Uniqueness of RXSOL-54-1048-020 ::: --- 
RXSOL-54-1048-020  Descaler has the ability to dissolve approximately 1.5kg of calcium carbonate scale per gallon in concentrated form. It does not need to be heated up during cleaning. The uniqueness of this Descaler allows you to clean some equipment while still in operation utilizing a minimum of your own personnel.

RXSOL-54-1048-020  is mixed with fresh water 3 to 20 percent depending on deposition of scaling.

If the equipment to be cleaned is contaminated by oil, grease, sludge or carbonized oil, then first of all clean the system with degreaser  RXSOL-10-1005. RXSOL-54-1048-020 should be mixed with fresh water to form a solution of 10-30%, depending on the extent of scaling. After using RXSOL-54-1048-020 ,  

PRECAUTION :::it is essential to thoroughly rinse all metal surfaces at least once with a 0.5% solution of  RXSO-20-2005  in fresh water. This solution should be circulated for 2-4 hours or until an acceptable pH value is obtained. This will neutralize any remaining acidity & passivate steel surfaces.


Procedure-of-use: The most effective descaling is accomplished by circulation.In the case of small components,the soak method in an immersion bath can be used. If the equipment to be cleaned is contaminated by oil, grease or sludge, then pre-cleaning with DEGREASER ( RXSOL OB 1005 ) is necessary. Depending on the extent of scaling, use a solution of 2.5-10% RXSOL-54-1008-025 . The solution will have a red colour which changes to orange when 85% of the acid has been neutralized , & to colourless  when the solution is totally neutralized. Whenever possible, the solution should be heated to 60°C.Neutralised  solutions can be re-activated by adding more RXSOL-54-1008-025  until the red colour reappears. 

Fields: Descaling of  Boilers, Descaling  of Diesel Engine Cooling Systems, Condenser, Pipeline collection system, Evaporators, Calorifiers, Heat Exchangers,The strength of the acid can be enhanced by adding 1part sodium chloride (common salt) to 20 parts of Descalex.If salt is not available, an acceptable alternative is to dissolve RXSOL-54-1008-025  in sea water. After use of RXSOL-54-1008-025  a  0.5% solution of Alkalinity Control in fresh  water should be used for neutralization.

After using  RXSOL-54-1048-020, sense all metal surfaces with 0.5 percent of  RXSOL-10-1005, at least 2-4 hour , up to neutral of PH value.

• Fast and effective scale remover.
• Soft on ferrous metals.
• Removes water scale & rust from boilers/diesel engine & other cooling system
• As well as from condensers, evaporators, & heat exchangers etc
 

Why Use RXSOL Descaler?

• It is a safe , economical concentrated  chemical to be used on the waterside of heat transfer equipment.
• You do not have to heat RXSOL-54-1048-020 .
  RXSOL-54-1048-020  is safer for the employees to use than other acid products.
• Your equipment will be cleaned in only hours without disassembling any part of the equipment. Equipment can also be cleaned without any down time (cleaning on the run).
•  Cleans down to the original surface without pitting.
•  RXSOL-54-1048-020 is safe on copper, copper-nickel, bronze, brass, iron, stainless steel and rubber.
•  RXSOL-54-1048-020  will extend the usable life of your equipment, especially when used as a part of a regularly scheduled preventative maintenance program.
•  Removing the scale build up allows your equipment to operate more efficiently with less down time.
   

RXSOL-54-1048-020 should not be used on Aluminium, Zinc, Tin, or any Galvanized Surfaces for which a special grade cleaner should be used. Chemical Cleaning Module Rx cleansers has developed a 280 litres capacity cleaning module, primarily designed for use with chemical acid solvents for descaling boilers, calorifiers, heat exchangers & other types of equipment where rust & scale form RXSOL-11-1008--DC Boilers, See Rx cleansers Practical Application Manual

Remarks

RXSOL-54-1048-020 should not be used on Aluminium, Zinc, Tin, or any Galvanized Surfaces for which a special grade cleaner should be used. Chemical Cleaning Module RX cleansers has developed a 280 litres capacity cleaning module, primarily designed for use with chemical acid solvents for descaling boilers, calorifiers, heat exchangers & other types of equipment where rust & scale form RXSOL-11-1008--DC Boilers, See RX cleansers Practical Application Manual

The engine room is the heart of any vessel, responsible for the propulsion and essential power systems that keep the ship running smoothly. Proper engine room maintenance is critical to ensuring safety, efficiency, and regulatory compliance. At RXMARINE International, we specialize in providing high-quality marine chemicals that enhance maintenance procedures, keeping vessels in top condition.

Why Engine Room Maintenance Matters

• Prevents Downtime & Costly Repairs: Regular inspections help detect early signs of wear and tear, reducing expensive breakdowns.

• Enhances Fuel Efficiency: A well-maintained engine operates efficiently, cutting down fuel consumption and operational costs.

• Ensures Crew Safety: Proper maintenance minimizes the risk of hazardous incidents such as fires, leaks, or mechanical failures.

• Regulatory Compliance: Compliance with international maritime regulations (IMO, SOLAS) is essential to avoid fines and ensure smooth sailing.

Key Aspects of Engine Room Maintenance

1. Cleaning & Degreasing

The accumulation of oil, grease, and dirt can lead to overheating and reduced efficiency. Using RXMARINE’s Engine Room Cleaners & Degreasers, you can effectively remove sludge, carbon deposits, and oil residues.

2. Lubrication System Maintenance

• Regular oil changes using high-quality marine lubricants help prevent friction and wear.

• Monitoring oil viscosity and contamination is crucial to detect potential engine issues early.

3. Cooling System Efficiency

• Scale and corrosion in heat exchangers and cooling lines reduce efficiency. Descaling chemicals like RXMARINE’s RXSCALE help prevent blockages and maintain optimal cooling.

• Ensure coolant levels are checked regularly to prevent overheating.

4. Fuel System Treatment

• Fuel contamination with water, sludge, and microbial growth can affect engine performance. Using fuel additives and biocides prevents clogging and improves combustion efficiency.

• Regularly clean fuel injectors and filters to maintain smooth operation.

5. Bilge Cleaning & Oil Spill Management

• The bilge area accumulates oil and sludge, which can pose environmental and safety hazards.

• RXMARINE’s Oil Spill Dispersants & Bilge Cleaners effectively break down oil and prevent pollution.

6. Corrosion Prevention

• Saltwater exposure accelerates corrosion in pipes, tanks, and metal surfaces.

• Apply corrosion inhibitors and protective coatings to extend the life of engine room components.

Best Practices for Engine Room Maintenance

• Implement a Routine Inspection Schedule – Daily, weekly, and monthly checks help identify problems early.
• Train Crew Members – Ensure engineers and crew are well-trained in maintenance procedures.
• Use High-Quality Marine Chemicals – Investing in premium cleaning, degreasing, and protective products ensures longevity and efficiency.
• Document Maintenance Activities – Keeping detailed logs helps in audits, repairs, and regulatory compliance.

Supply Locations

Air Cooler Scale Dissolver Air Cooler Cleaner Sea Water SIDE specialized product for CLEANING of SCALE from SEA WATER side. We are manufacturer and supplier of AIR COOLER cleaner in Mumbai, Rabale, Mahape, Turbha, Maharastra, Surat Hazira Kandla Mundra, Gandhidham, Gujrat, Kolkata Haldia Paradip, Visakhapatnam, Gangavaram Kakinada, Chennai Ennore, JNPT in INDIA and Dubai, Sharjah, Ajman, Abudhabi, Fujairah UAE GULF, Ruwi Gala, Barka, Muscat Oman, Sudan, Yemen, NAirobi, Kenya CANADA