| PRODUCT NAME | : | - Allylalcohol |
| CAS number | : | - 107 – 18-6 |
| UN number | : | - 1098 |
| Formula | : | - H2C=CHCH2OH |
| Odour | : | - PUNGENT MUSTARD LIKE |
| Solubility in water | : | - COMPLETE |
| Density | : | - 0.852 at 20 oC |
| Boiling point | : | - 97 oC |
| Melting point | : | - -129 oC |
| Viscosity | - 1.49 cp at 15 oC | |
| Flashpoint | : | - 21 oC |
| Explosive limits | : | - 2.5 – 18 Vol% |
| Vapour pressure | : | - 24 mbar at 20 oC |
| Skin absorption/irritation | : | - YES |
| TLV Country NL Years 1995 | : | - 2 S ppm 5 S mg/m3 |
| Pollution category 1994 | : | - B |
Dosage
Remarks
Product Name
Allyl Alcohol
Product Type
RXSOL-19-1220-025
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Phone +91 22 65113333/ 5555 / 9999 / 27611360 / 27815540
Fax +91 22 2781 1318 :::AOH :0091 9322594669
Email mail@rxmarine.com
Composition:
Name CAS # % by Weight
Allyl alcohol 107-18-6 100
Toxicological Data on Ingredients:
Allyl alcohol: ORAL (LD50): Acute: 64 mg/kg [Rat]. 96 mg/kg [Mouse]. 71 mg/kg [Rabbit]. DERMAL (LD50): Acute: 45 mg/kg [Rabbit].
Potential Acute Health Effects:
Extremely hazardous in case of skin contact (irritant), of eye contact (irritant), of inhalation. Very hazardous in case of skin contact (permeator), of ingestion. Severe over-exposure can result in death. Inflammation of the eye is characterized by redness, watering, and itching. Skin inflammation is characterized by itching, scaling, reddening, or, occasionally, blistering.
Potential Chronic Health Effects:
CARCINOGENIC EFFECTS: Not available.
MUTAGENIC EFFECTS: Not available.
TERATOGENIC EFFECTS: Not available.
DEVELOPMENTAL TOXICITY: Not available.
Repeated exposure to a highly toxic material may produce general deterioration of health by an accumulation in one or many human organs.
Eye Contact:
Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Cold water may be used. Get medical attention immediately.
Skin Contact: In case of contact, immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Cover the irritated skin with an emollient. Cold water may be used.Wash clothing before reuse. Thoroughly clean
shoes before reuse. Get medical attention immediately.
Serious Skin Contact: Wash with a disinfectant soap and cover the contaminated skin with an anti-bacterial cream. Seek immediate medical attention.
Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Serious Inhalation: Evacuate the victim to a safe area as soon as possible. Loosen tight clothing such as a collar, tie, belt or waistband. If breathing is difficult, administer oxygen. If the victim is not breathing, perform mouth-to-mouth resuscitation. Seek medical attention.
Ingestion: If swallowed, do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Loosen tight clothing such as a collar, tie, belt or waistband. Get medical attention immediately.
Serious Ingestion: Not available.
Flammability of the Product: Flammable.
Auto-Ignition Temperature: 378°C (712.4°F)
Flash Points: CLOSED CUP: 21°C (69.8°F).
Flammable Limits: LOWER: 2.5% UPPER: 18%
Products of Combustion: These products are carbon oxides (CO, CO2).
Fire Hazards in Presence of Various Substances: Not available.
Explosion Hazards in Presence of Various Substances: Risks of explosion of the product in presence of mechanical impact: Not available. Risks of explosion of the product in
presence of static discharge: Not available.
Fire Fighting Media and Instructions: Flammable liquid, soluble or dispersed in water. SMALL FIRE: Use DRY chemical powder. LARGE FIRE: Use alcohol foam,
water spray or fog. Cool containing vessels with water jet in order to prevent pressure build-up, autoignition or explosion.
Special Remarks on Fire Hazards: Not available.
Special Remarks on Explosion Hazards: Not available.
Small Spill:
Dilute with water and mop up, or absorb with an inert dry material and place in an appropriate waste disposal container.
Large Spill:
Flammable liquid. Poisonous liquid. Keep away from heat. Keep away from sources of ignition. Stop leak if without risk.
Absorb with DRY earth, sand or other non-combustible material. Do not get water inside container. Do not touch spilled material. Use water spray to reduce vapors. Prevent entry into sewers, basements or confined areas; dike if needed. Call for assistance on disposal. Be careful that the product is not present at a concentration level above TLV. Check TLV on the MSDS and with local authorities.
Precautions:
Keep locked up.. Keep away from heat. Keep away from sources of ignition. Ground all equipment containing material. Do not ingest.
Do not breathe gas/fumes/vapor/spray. In case of insufficient ventilation, wear suitable respiratory equipment. If ingested, seek medical advice immediately and show the container or the label. Avoid contact with skin and eyes.
Storage:
Store in a segregated and approved area. Keep container in a cool, well-ventilated area. Keep container tightly closed and sealed until ready for use. Avoid all possible sources of ignition (spark or flame).
Engineering Controls: Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below their respective threshold limit value. Ensure that eyewash stations and safety showers are proximal to the work-station location.
Personal Protection: Splash goggles. Lab coat. Vapor respirator. Be sure to use an approved/certified respirator or equivalent. Gloves.
Personal Protection in Case of a Large Spill: Splash goggles. Full suit. Vapor respirator. Boots. Gloves. A self contained breathing apparatus should be used to avoid inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist BEFORE handling this product.
Exposure Limits: STEL: 4 (ppm) Consult local authorities for acceptable exposure limits.
Physical state and appearance: Liquid.
Odor: Pungent mustard. (Strong.)
Taste: Not available.
Molecular Weight: 58.08 g/mole
Color: Colorless.
pH (1% soln/water): Not available.
Boiling Point: 96.9 (206.4°F)
Melting Point: -129°C (-200.2°F)
Critical Temperature: Not available.
Specific Gravity: 0.854 (Water = 1)
Vapor Pressure: Not available.
Vapor Density: Not available.
Volatility: Not available.
Odor Threshold: Not available.
Water/Oil Dist. Coeff.: Not available.
Ionicity (in Water): Not available.
Dispersion Properties: See solubility in water.
Solubility: Easily soluble in cold water, hot water.
Stability: The product is stable.
Instability Temperature: Not available.
Conditions of Instability: Not available.
Incompatibility with various substances: Not available.
Corrosivity: Non-corrosive in presence of glass.
Special Remarks on Reactivity: Not available.
Special Remarks on Corrosivity: Not available.
Polymerization: Yes.
Routes of Entry: Dermal contact. Eye contact. Inhalation. Ingestion.
Toxicity to Animals: Acute oral toxicity (LD50): 64 mg/kg [Rat]. Acute dermal toxicity (LD50): 45 mg/kg [Rabbit].
Chronic Effects on Humans:
Not available.
Other Toxic Effects on Humans: Extremely hazardous in case of skin contact (irritant), of inhalation. Very hazardous in case of skin contact (permeator), of ingestion.
Special Remarks on Toxicity to Animals:
Not available.
Special Remarks on Chronic Effects on Humans:
Not available.
Special Remarks on other Toxic Effects on Humans:
Not available.
Ecotoxicity: Not available.
BOD5 and COD: Not available.
Products of Biodegradation: Possibly hazardous short term degradation products are not likely. However, long term degradation products may arise.
Toxicity of the Products of Biodegradation: The products of degradation are as toxic as the original product.
Special Remarks on the Products of Biodegradation: Not available.
Waste Disposal:
DOT Classification:
CLASS 6.1: Poisonous material.
Identification: :
Allyl alcohol UNNA: UN1098 PG: I
Special Provisions for Transport:
Poison inhalation hazard zone B
Federal and State Regulations:
Pennsylvania RTK: Allyl alcohol Florida: Allyl alcohol Massachusetts RTK: Allyl alcohol New Jersey: Allyl alcohol TSCA 8(b)
inventory: Allyl alcohol
Other Regulations:
OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR 1910.1200).
Other Classifications:
WHMIS (Canada):
CLASS B-2: Flammable liquid with a flash point lower than 37.8°C (100°F).
CLASS D-1A: Material causing immediate and serious toxic effects (VERY TOXIC). CLASS D-2B: Material causing other toxic effects (TOXIC).
DSCL (EEC):
R10- Flammable.
R25- Toxic if swallowed.
R27- Very toxic in contact with skin.
R38- Irritating to skin.
R41- Risk of serious damage to eyes.
HMIS (U.S.A.):
Health Hazard: 3
Fire Hazard: 3
Reactivity: 0
Personal Protection: h
National Fire Protection Association (U.S.A.):
Health: 3
Flammability: 3
Reactivity: 0
Specific hazard:
Protective Equipment:
Gloves. Lab coat. Vapor respirator. Be sure to use an approved/certified respirator or equivalent. Wear appropriate respirator when ventilation is inadequate. Splash goggles.
The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product in terms of safety requirements and does not signify any warranty with regard to the product's properties The data given here only applies when product used for proper application(s). The product is not sold as suitable for other applications usage in such may cause risks not mentioned in this sheet. Do not use for other application(s) without seeking advice from manufacturer.
Supply Locations
Allyl Alcohol manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Allyl Alcohol at a competitive price from us. We have ready stock of Allyl Alcohol in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.