Cool Water Treat Corrosion Inhibitor

Cooling water Treatmanet Corrosion Inhibitor NCLT is specialized Cooling Water treatment chemicals for a closed re-circulating water system. Suitable for all types of engines where water circulation permitted.  Major engine manufacturers such as MAN Diesel and Wartsila have a suggestion to use proper balance dose of Nitrite, Borate and organics based corrosion inhibitor in water circular line. 

Physical Properties
  
Density                    1.06
Packing, Type         25 Ltrs
Colour                    Colourless
Appearance            Liquid

Liquid product, easy to use. Environmentally friendly, fully organic product, low toxicity. Effective against cavitation and erosion. Superior heat transfer properties. Compatible with hoses, gaskets and seals. Compatible with glycols for frost protection. Stable product - non-depleting. The product  used for corrosion inhibition in many types of closed re-circulation system such as: - Diesel engine cooling water systems - Compressor cooling water systems - Centralised cooling systems - Hot water heating systems - Auxiliary machinery cooling systems.

Dosage

Using Method : -

RXSOL Cool water Treat Corrosion Inhibitor  is a highly effective corrosion inhibitor for all common metals in cooling water systems.Where most traditional inhibitors react with the metal surface and form oxides that prevent further corrosion, Cool water Treat Corrosion Inhibitor  applies a thin and durable layer of protective molecules to the metal surfaces. This technology prevents the continuous build-up of insulating layers on heat transfer surfaces.

For new builds, RXSOL  recommends cleaning of the water system before commercing service. The system will always contain small amounts of oil and iron oxides, and this can be easly removed in 1 time with Rxsol Commissioning Cleaner. If the system is corroded or is more heavily contaminated use Rxsol Degreaser HD. RXSOL Safe Acid  for removal of metal oxides or scale is recommended.
For systems previously treated with other products, RXSOL Ships Service recommend to drain and flush the system before refilling with distilled water and Cool WATER treat . The system should be clean and free from scale and corrosion products when starting the treatment.
The use of antifreeze is sometimes required if the vessel is to be laid up in cold areas, Cool water Treat Corrosion Inhibitor  can be used in conjunction with glycols for frost protection. If used in conjunction with glycols, It is recommended to increase the product concentration to 8%.

Dosing method
Cool water Treat Corrosion Inhibitor  should be dosed to a suitable point in the system. If the expansion tank is used, adequate circulation must be assured.
Dosage and control
Cool water Treat Corrosion Inhibitor  should always be present in a concentration of 5% or higher in the system. It is good practice to start with initial dose for an untreated system of 60 litres of Cool water Treat Corrosion Inhibitor /ton. 5% will provide sufficient protection of the system for a period of two to five years under normal conditions provided. To prevent residual falling below minimum level due to loss of cooling water, RXSOL Service recommend to maintain a level of 6% Cool water Treat Corrosion Inhibitor  in the cooling system.
The engine manufacturer's recommendations for water quality should always be complied with. Cool water Treat Corrosion Inhibitor  provides good protection even with contamination of the system by i.e. inorganc salts.Maintain Chloride levels and other contaminants at a minimum level. Most engine manufacturers recommend a maximum of 50 ppm Chlorides.

Notes

CHEMICAL,PROCESS, CORROSION INHIBITOR, LIQUID KG
COMPOSITION / INFORMATION ON INGREDIENTS:

- AN AQUEOUS SOLUTION OF SODIUM NITRITE

- Content : SODIUM NITRITE 

- CAS # 7632-00-0

PHYSICAL AND CHEMICAL PROPERTIES

=================================

- PHYSICAL STATE : LIQUID

- ODOUR : MILD

- PH : 12.5 13.5

- FREEZING POINT : - 10 °C

- INITIAL BOILING POINT : > 100 °C

- SOLUBILITY IN WATER : COMPLETE

- COLOR : PINK

Precautions

WHERE USED:

- RR WEST UNITS

- CBDC UNIT U-2026: USED IN FRESH COOLING WATER SYSTEM (U-2026) OF CBDC TO  PROTECT CARBON STEEL AS WELL AS YELLOW METALLURGY OF FCW COOLERS. FROM CORROSION AND CONTAINS PH BUFFERS TO DEFEND THE SYSTEM AGAINST PH CHANGES.

 

NOTE :

- SHELF LIFE REQUIRED IS 2 YEARS (MINIMUM) FROM DATE OF PRODUCTION 

Item Specs:

GENERIC TYPE: CORROSION INHIBITOR

FORM: LIQUID

SERVICE: WATER TREATMENT

 

Useful area

RXSOL Cooling water Treatmanet Corrosion Inhibitor is an organic liquid corrosion inhibitor with low-toxic property provides long-life corrosion protection for closed cooling water systems RXSOL Cooling water Treatmanet Corrosion Inhibitor will protect all commonly used materials in engine cooling water systems, including aluminium. Cooling water Treatmanet Corrosion Inhibitor  does not contain components subject to rapid depletion. Cool WATER treat  is stable and  biodegradable

Industrial area

"Product Code" - Chemical Description SPECIFICATION . 

Supply location

Cool water Treat Corrosion Inhibitor manufacturer and supplier in Mumbai, Gandhidham, Chennai Ennore, Visakhapatnam, Kolkata, Haldia, Hazira, Surat, Vizag, Fujairah, Sharjah, Ajman, Dubai, Muscat Canada, SUDAN, Yemen, Nairobi Kenya

Generic name

Keywords

Features of Cool Water Treat Corrosion Inhibitor

• Contains Corrosion inhibitors for C.S, S.S, & Cu, which helps to extend equipment life & reduce maintenance costs.

• Contains no heavy metals compatible with antifreeze, no environmental restrictions.

• Completely water soluble, which enhances complete system protection.

• Contains high concentrations of active inhibitors, thus dosage rates become more cost effective.

• Cool Water Treat Corrosion Inhibitor is most effective at pH> 8.0.

• Cool Water Treat Corrosion Inhibitor is formulated with a synergistic blend of nitrite and other Inhibitors.

• Contains a blend of alkalis to offer metal passivation.

• Contains a special dye to trace system leaks & observe Inhibitor Concentration.

• Cool Water Treat Corrosion Inhibitor contain special Corrosion Inhibitors that can tolerate moderate heat fluxes.

• Contains Corrosion Inhibitors for soft metals (weld joints).