What is the freezing point of 50/50 propylene glycol and water?
A 50/50 propylene glycol and water premix typically freezes at about -33 °C (-28 °F). Freeze point charts by mass give -34 °C at 50%. Do not run the loop close to that temperature, because slush forms before the fluid freezes solid.
Read more →
Is a 50/50 propylene glycol mix too strong for a food plant chiller?
Often it is. Food and beverage chillers commonly run 30 to 35% propylene glycol by volume with a setpoint near -3 to -2 °C. A 50% loop moves heat noticeably slower than a 35% loop, so keep 50/50 for blast freezers, cold stores and low-temperature duty.
Read more →
Can I use ethylene glycol or automotive antifreeze, or mix USP and inhibited propylene glycol?
No. Ethylene glycol must not be used where it could leak into food or potable water. Use food grade propylene glycol wherever a leak could reach the product, and use inhibited fluid only in fully isolated loops. Do not mix the two in one system, and flush the loop before you switch.
Read more →
What water should I mix with propylene glycol: tap, distilled or deionised?
Use deionised, distilled or RO water. Tap water can carry chlorides that pit stainless steel and hardness that leaves scale on heat-exchange surfaces. Top up with premix at the loop's own strength, not with plain water.
Read more →
Where can I buy food grade propylene glycol in Oman?
Muscat Chemical is based in Barka Industrial Area and lists propylene glycol IP food grade (part number RXSOL-19-1615-025). Send your loop volume and target strength on WhatsApp +968 77333599 for a quote, and we will confirm packing and delivery in the quote.
Read more →