Flocculant Cationic Polymer DAF
RXSOL Flocculant is a very effective liquid treatment based on Polymer to separate oil residues from bilge water. It is iron-free and is completely safe for the environment.
| Form | Liquid |
| Colour | Colourless |
| Odour | Odourless |
| pH | 1 -2 |
| Melting Point | -25 °C / -13 °F |
| Boiling Point | 100 - 120 °C |
| Secific Gravity | 1.15 - 1.25 |
| Solubility in Water |
Micible |
International environmental regulations set strict rules as to the oil content in effluent water from ships. To meet these regulations, a combination of mechanical and chemical cleaning is necessary. Rxsol Flocculant is used in combination with multistage bilge water cleaning systems that include mechanical separation of free oil, emulsion breaking, flocculation and filtration. After dosing, Rxsol Flocculant breaks the oil-in-water emulsion created by contaminants in lubricating and fuel oils, emulsifying cleaning agents etc. It then destabilizes the remaining small oil droplets and agglomerates them into larger particles (flocs) that are easily collected by filtering.
Dosage
Dosing method :
Typical dose rate: 100 - 500ppm (0.1 - 0.5 litre/m3 of water)
In a multistage bilge water cleaning system, RXSOL Flocculant is fed undiluted through a dosage pump connected to the pressure side of the oil descaler. The floc tank is fed according to the flow of the bilge water pumped into it.The feed is adjusted in connection with the installation and normally needs no alteration. If required, dosing can also be controlled by measuring the level in the container.
Supply Locations
Flocculant Cationic Polymer DAF manufacturer and supplier in India, UAE Gulf, Oman, Nairobi Kenya. Flocculant Cationic Polymer DAF available andready stock supplier Fujairah, Abudhabi, Ajman, Dubai, Sharjah, Ruwi, Barka, Sohar, Muscat Oman, Sudan, Yemen