FOAMDET SUPER

RXSOL ALKALINE FOAM CLEANER

Heavy-duty foaming cleaner for grease, fats and stubborn soils

RXSOL ALKALINE FOAM CLEANER is a concentrated, high-foaming alkaline detergent designed to loosen and remove oil, grease, fats and other stubborn organic soils from equipment and hard surfaces. Its clinging foam helps maintain contact on vertical surfaces and hard-to-reach areas.

Suitable for: Industrial equipment, machinery, floors, walls, tanks and other compatible hard surfaces.

High Foam cleaner manufacturer supplier and Exporter in India, UAE, Oman.  The Importance of HIGH FOAM  by High-Pressure Cleaning increases during ship hold cleaning chemicals.

Powerful, high-foam surfactant blend designed for deep cleaning across a wide range of industrial and commercial applications. Its rich, stable foam clings to vertical and hard-to-reach surfaces, breaking down grease, oils, dirt, and grime effectively. Safe for use on metals, plastics, glass, and painted surfaces, it ensures thorough cleaning without abrasion or damage. Ideal for cleaning machinery, floors, vehicle exteriors, heat exchangers, and food processing areas. Compatible with foam cannons, spray systems, and manual application.

Very effective emulsifier - based cleaner for use in hold cleaning and general digressing. its heavy molecular surfactants rapidly reacts with water and produce effective cleaning solution .May be applied by brush, hand spray and by high and low pressure washing machines.
Heavy Soil deposition                    Use Undiluted from to 20-50% diluted with water. 
Medium soil deposition                 10-20%  diluted with water. 
Light Soil ( general degreasing )   5-10% diluted with water.

Application: Apply with a foam applicator or suitable foaming system. It can also be used for manual or pressure cleaning. Choose the dilution and contact time based on the soil and surface, then rinse thoroughly with water. Always check surface compatibility and follow the product’s safety data sheet.

3 Pieces of Good Advice:
Apply  RXSOL solution on dry surface where possible! A dry surface will absorb far better than a wet surface. When applying RXSOL on vertical surfaces: Start application from the bottom and work upwards! If beginning from the top and going downwards, the RXSOL may produce "channels" down the surface, thereby running too fast off the surface. During high pressure cleaning: It is important that the rinsing water does not run over non-cleaned surfaces! The rinsing water can draw soap from the surface if running over non-cleaned surfaces. High pressure together with optimum concentration of RXSOL will give the best effect.

Dosage

General Cleaning:- This can be used for all types of cleaning &  degreasing & may  be applied by  Brush, Hand spray, high and low pressure washing machines etc. Time necessary for cleaning depends on the nature and  thickness of the deposits. 20-30 min. will suffice for   most applications. Hardened, carbonised or aged deposits may require up to 4 hours. If  the cleaning  solution is not heavily contaminated, it may be re-used at a later stage. If allowed to cool, the de-gassing procedure must be repeated. Depending on degree of contamination RXSOL should be mixed with warm water at a rate of 50-200 ml   per 10 litres. i.e. 1 cup of RxTuff to a bucket of water. RXSOL solution can  be applied  simply by mops, brushes or rags, or by dipping the soiled articles into  the RXSOL solution. After cleaning, rinse off with cold or warm water. Due to high foaming properties, RxTuff is not recommended for washing machines.


Caution: Avoid use on soft metals and other surfaces that may be damaged by alkaline cleaners. For food contact surfaces, use only where the product’s approved instructions allow, and rinse with potable water.

Notes

For degreasing and removal of residues of mimerals oil , coal stain and soot from surface.

Safety Phrases
S-2 Keep out of the reach of children.
S-26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S-36/37/39 Wear suitable protective clothing, gloves and eye/face protection.
S-45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).

Key Features of Foam Cleaning Agent

• High-foaming action for vertical surface coverage
• Removes oil, grease, and stubborn residues
• Safe on metals, glass, plastics, and coatings
• Biodegradable and non-abrasive formula
• Compatible with manual or mechanical foaming systems

Precautions

It is a superior heavy duty and highly concentrated water based FOAM cleaner. RXSOL is a superior & powerful alkaline cleaner containing corrosion inhibitors to prevents the corrosion of   metals . It is low toxic product with an exceptional solvency power on soil & oily  matter & having good foaming qualities. It is free from Hydrocarbon solvents , Biodegradable and minimizes the extreme hazards to personnel in handling materials .

Ideal for difficult cleaning problems faced in industrial and other plants,  Very effective degreaser which removes dirt, oil and grease from the equipment, parts, components, engines, floors and walls etc. 

Foam Cleaning Agent manufacturer in India

Supply location

High Foam Cleaning agent manufacturer and supplier in India Kandla, Mundra, Jamnagar- Sikka, Mumbai, Chennai Ennore, Visakhapatnam, Hazira, Kolkata, Haldia, Paradip, Fujairah, Sharjah, Ajman, Sohar, Muscat, Abudhabi UAE  OMAN

High Foam Cleaning Detergent manufacturer and supplier Thane-Belapur Road, Thane, Mumbai, Pune, Nashik, Ranchi, TATA, Kolkata, Durgapur, Varansahi, Bihar, Uttar Pradesh, Gujrat, Vizag, Chennai, Kandla, Maharashtra

Generic name

Keywords

The job of high pressure with high foam cleaning can be done easier & quicker by simply using RXSOL correct dosages. Using a high pressure cleaner alone, without any CLEANER, will not  achieve  optimal cleaning results High-pressure cleaning primarily refers to cleaning of Hard  surfaces, such  as Decks, Tanks, Engine-rooms, etc. and in the majority of cases the cleaning is done according to the so-called two-step method:

Step 1:  Spraying the  RXSOL solution over the area to be cleaned.
Step 2:   Washing down the area using a high-pressure water jet.

After the solution has been  sprayed on the surface and  before the wash down begins, the chemicals penetrates & thoroughly moistens dirt & other grime. During wash down, the RXSOL thoroughly dissolves the particles of dirt, even oil and fat, in the water spray and thus achieves optimal cleaning results.In addition to being more effective, the use of RXSOL substantially reduces the time required for the Cleaning operation, as well as preventing dirt from reforming on the surface. The use of RXSOL in correct dosages is half the job done.