RO Antiscalant 9005
MSDS not yet available online for this product — email us at muscatchem @ gmail.com and we'll send you a copy.
RXSOL RO Antiscalant 9005 – High Performance Reverse Osmosis Membrane Scale Inhibitor
Product Name: RXSOL RO Antiscalant 9005
Brand: RXSOL – RX Marine International
Product Category: Reverse Osmosis Chemicals / Membrane Scale Inhibitors / Water Treatment Chemicals
Application: Industrial RO Plants, Brackish Water RO, Seawater RO, Desalination Plants and Water Recycling Systems
Proposed RXSOL product designation. Product code and performance specifications require confirmation.
Product Description
RXSOL RO Antiscalant 9005 is a proposed high-performance liquid antiscalant and dispersant for controlling inorganic scale formation and particulate fouling in Reverse Osmosis (RO) membrane systems.
The product is intended to minimize the deposition of sparingly soluble salts, including calcium carbonate, calcium sulfate, barium sulfate and strontium sulfate, while assisting in the dispersion of suspended inorganic particles and metal oxide contaminants.
RXSOL RO Antiscalant 9005 is designed for use in industrial RO plants treating groundwater, surface water, brackish water, seawater and suitably pretreated industrial effluent.
Its proposed treatment approach combines scale inhibition, crystal growth modification and dispersant action to help maintain membrane cleanliness and reduce mineral scaling.
Key facts
- Product
- RO Antiscalant 9005
- Part No.
- RXSOL-41-9005-025
- Category
- RO Chemicals
- Also known as
- Thermax MAXTREAT 9005 Reverese Osmosis Antiscalant
- Supplier
- Muscat Chemical, Barka, South Al Batinah, Oman
- Delivery
- Muscat, Sohar, Salalah, Duqm, Nizwa, Sur, Barka and Gulf ports
- Documents
- MSDS and TDS on request
- Pricing
- Quote on request — contact us or WhatsApp +968 77333599
Technical Specifications
|
Parameter |
Proposed RXSOL Description |
|---|---|
|
Appearance |
Liquid |
|
Product Type |
RO Membrane Antiscalant and Dispersant |
|
Chemical Nature |
Proprietary Antiscalant blend final composition to be established |
|
Water Solubility |
Intended to be fully water-miscible |
|
Target Feedwater |
Groundwater, surface water, brackish water and seawater |
|
Target Operating pH |
6–10, subject to validation |
|
Calcium Carbonate Control |
Target performance up to LSI +2.2, subject to testing |
|
Recommended Dose |
Preliminary evaluation range 1–6 ppm |
|
Injection Point |
Upstream of RO cartridge filtration, subject to system design |
|
Packaging |
Proposed 20 kg, 25 kg and 210 kg |
|
Shelf Life |
To be established by stability testing |
Storage and Handling
Store in tightly closed, chemically compatible containers away from direct sunlight and extreme temperatures. Protect the product from contamination.
Use suitable gloves and eye protection when handling concentrated treatment chemicals. Follow the actual RXSOL Safety Data Sheet once the commercial formulation has been finalized.
RXSOL RO Antiscalant Supplier in India, UAE and Oman
RXSOL supports industrial water treatment chemical enquiries across major industrial and marine markets.
India: Mumbai, Navi Mumbai, Kolkata, Chennai, Visakhapatnam, Kakinada, Ahmedabad, Surat, Jamnagar, Kandla, Mundra, Paradip and other industrial locations.
United Arab Emirates: Dubai, Abu Dhabi, Sharjah, Ajman, Fujairah, Jebel Ali, Musaffah and Ruwais.
Oman: Muscat, Sohar, Salalah, Duqm, Sur and other industrial locations.
Product availability, packaging and delivery arrangements are subject to confirmation.
Applications of RXSOL RO Antiscalant 9005
1. Industrial Reverse Osmosis Plants
Intended to help prevent mineral scale accumulation on RO membrane surfaces in industrial water purification systems.
2. Brackish Water RO Systems
Designed for scale management in brackish groundwater treatment plants containing elevated concentrations of calcium, magnesium, sulfate and other dissolved minerals.
3. Seawater Desalination Plants
Suitable as a development candidate for seawater RO applications where high salinity and scaling potential require specialized chemical treatment.
4. Wastewater Recycling and Reuse
Can be evaluated for RO systems treating suitably pretreated industrial effluent, where variable water chemistry may increase scaling and particulate fouling risks.
5. Boiler Feedwater Preparation
Intended for RO pretreatment systems supplying purified water to industrial boilers and steam generation facilities.
6. Power Plants and Process Industries
Potential applications include RO systems in power generation, petrochemicals, refineries, manufacturing facilities and industrial utilities.
Mechanism of Action
RXSOL RO Antiscalant 9005 is intended to work through three principal mechanisms.
Threshold Inhibition: Antiscalant molecules interfere with the nucleation and growth of mineral scale, helping prevent precipitation at low treatment concentrations.
Crystal Modification: The formulation interferes with crystal development, reducing the tendency of scale-forming minerals to form adherent deposits.
Dispersion: Dispersant components help keep selected inorganic particles suspended in the flowing water, reducing their tendency to accumulate on membrane surfaces.
Dosage
Recommended Dosage and Application
1–6 ppm of neat product, with injection upstream of the cartridge filter.
|
Feedwater Condition |
Dosing Recommendation |
|---|---|
|
Low scaling potential |
Establish through water analysis |
|
Moderate scaling potential |
Determine using scaling calculations |
|
High hardness / sulfate concentration |
Conduct detailed antiscalant evaluation |
|
High silica concentration |
Verify silica limits and treatment performance |
|
High recovery RO system |
Evaluate concentrated reject-water chemistry |
Dosage Calculation
For a liquid product, when dosage is expressed in mg/L:
Where:
-
Q = RO feedwater flow in m³/h
-
D = required product dosage in mg/L
-
Product density in kg/L
RO Antiscalant Dosing Calculator
Antiscalant dosage = 3 mg/L
Then Neat product feed ::: 0.136 L/h
Neat product per day ::: 3.27 L
Illustrative calculation assuming continuous operation for 24 hours. Density of 1.10 kg/L is an example, not a measured RXSOL specification. Actual dosage must be established from feedwater analysis.
Application Procedure
-
Analyze RO feedwater for calcium, magnesium, alkalinity, sulfate, silica, barium, strontium, iron, pH and total dissolved solids.
-
Determine the intended membrane recovery rate and operating temperature.
-
Calculate scaling potential at the concentrate end of the RO system.
-
Select and validate the antiscalant dosage.
-
Install the dosing system at a location that provides adequate mixing before the membranes.
-
Monitor differential pressure, normalized permeate flow, salt rejection and cleaning frequency.
NOTE ::: Do not combine concentrated antiscalant directly with other treatment chemicals unless compatibility has been established.
Notes
Scale Deposits Targeted
|
Scale or Deposit |
Intended Treatment Function |
|---|---|
|
Calcium Carbonate (CaCO₃) |
Threshold scale inhibition |
|
Calcium Sulfate (CaSO₄) |
Crystal growth inhibition |
|
Barium Sulfate (BaSO₄) |
Scale formation control |
|
Strontium Sulfate (SrSO₄) |
Scale inhibition |
|
Silica (SiO₂) |
Scale management and dispersion |
|
Iron Oxides |
Particulate dispersion |
|
Other Metal Oxides |
Fouling reduction through dispersion |
Actual performance must be established using the selected formulation, feedwater analysis and membrane operating conditions.
Precautions
Frequently Asked Questions
Q1. What is RXSOL RO Antiscalant 9005?
It is a proposed liquid antiscalant and dispersant intended for controlling inorganic scale formation in Reverse Osmosis membrane systems.
Q2. What types of scale can RO antiscalants control?
Appropriately formulated antiscalants can inhibit calcium carbonate, calcium sulfate, barium sulfate and strontium sulfate. Silica control requires additional formulation-specific validation.
Q3. What is the recommended dosage?
The reference product uses 1–6 ppm. The final RXSOL dosage must be determined through feedwater analysis and product performance testing.
Q4. Where should antiscalant be injected?
Normally into the RO feedwater line before the membrane system, at a point allowing adequate mixing and consistent chemical distribution.
Q5. Can the product be used in seawater RO plants?
A suitable antiscalant can be used in seawater RO systems, but membrane compatibility, salinity and scaling performance must be verified for the final formulation.
Q6. Does antiscalant remove existing membrane scale?
No. Antiscalants are primarily preventive chemicals. Existing deposits generally require an appropriate membrane-cleaning procedure.
Industrial area
How the Formulation Works
HEDP: Provides threshold inhibition against calcium carbonate and other selected inorganic deposits.
PBTC: Contributes scale inhibition and helps manage metal-ion interactions.
Polyacrylate: Helps modify crystal growth and disperse suspended inorganic particles.
PPCA: Provides additional scale inhibition and dispersant performance, particularly useful when developing broad-spectrum formulations.
The combination is intended to address multiple scaling mechanisms rather than relying on a single active ingredient.
Supply location
RXSOL RO Antiscalant 9005 for membrane scale inhibitior manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Barka Sohar Muscat Oman, Kenya Africa. Get the best quality of RXSOL RO Antiscalant 9005 for membrane scale inhibitior at a competitive price from us. We have ready stock of RXSOL RO Antiscalant 9005 for membrane scale inhibitior in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
Generic name
Reverese Osmosis AntiscalantKeywords
Key Features and Benefits
-
Helps control calcium carbonate scale formation.
-
Designed to inhibit calcium sulfate, barium sulfate and strontium sulfate deposits.
-
Supports silica-scale management, subject to feedwater chemistry and performance validation.
-
Helps disperse suspended inorganic particles and metal oxide contaminants.
-
Reduces the tendency of scale-forming crystals to deposit on membrane surfaces.
-
Suitable for development for high-salinity and brackish water applications.
-
Can help maintain membrane performance when correctly selected and dosed.
-
Intended for use with compatible commercial RO membranes.
-
Suitable for automated chemical dosing systems.