Efflorescence Cleaner Neutral
SKU
RXSOL-90-1118-025
Also known as
Efflorescence Cleaner Neutral
Neutral Efflorescence Cleaner is a water-based, pH-neutral cleaning formulation specifically developed to remove light to moderate efflorescence, mineral deposits, construction dust and alkaline residues from masonry and stone surfaces without causing acid attack. The product utilizes advanced chelation technology to dissolve and suspend mineral salts while being safe for acid-sensitive substrates.
Tag Identification
#EfflorescenceRemover_IndiaUAEoman
#EfflorescenceCleaner_IndiaOMANuae
Note
How to clean Efflorescence easily?
- Apply by brush or low-pressure sprayer.
- Allow 5-10 minutes contact time.
- Agitate using a soft nylon brush.
- Rinse thoroughly with clean water.
| Property | Specification |
|---|---|
| Appearance | Clear to Slightly Hazy Liquid |
| Colour | Colourless to Pale Yellow |
| Odour | Mild |
| pH | 6.8-7.5 |
| Specific Gravity | 1.04-1.08 |
| Solubility | Completely Miscible with Water |
| Flash Point | Non-flammable |
| VOC | <1% |
| Biodegradability | Readily Biodegradable |
| Foaming | Low |
| Shelf Life | 24 Months |
Where to use Neutral Efflorescence Cleaner
- Natural Stone
- Marble
- Granite
- Limestone
- Sandstone
- Ceramic Tiles
- Porcelain Tiles
- Concrete Floors
- Pavers
- Brick Walls
- Cementitious Grout
- Decorative Concrete
- Polished Concrete
- Precast Concrete
What is Efflorescence?
Efflorescence means powdery or crystalline deposit on masonry / concrete wall. Crystaline Deposit may be shade of white, brown, gray, or yellow appeal on walls.
Root Cause of Efflorescence on walls when water present in the building surfaces dissolves certain salts and migrates to other areas, leaving behind salty deposits as it evaporates. Efflorescence cleaning is a major problem when it comes to concrete surfaces.
Concrete efflorescence can be triggered by faulty waterproofing, humidity, rain, and condensation. While exterior efflorescence is tricky enough, treating interior efflorescence is considered even more challenging.
Approximately 5-10 m²/L, depending on surface porosity and contamination level.
