Skip to main content

Style Options

Layout Style

Colors schema

Direction

Email :MUSCATCHEMICAL.COM @ gmail.com Support : 00968 99489269
Whats APP:: Oman: +968 93960629
Oman:+968 99489269 UAE:+971569159739

Degreaser Aqueous pH Conc. B F E Conc

Aqueous pH Degreaser Conc.  BFE Conc   is a multipurpose concentrate cleaner and can be diluted as per requirement . Its unique concentrated formulation & superior performance in hot or cold water makes it very popular to remove Remove difficult or hard deposits from all kinds of surface.

RXSOL-10-1741-025 Concentrated degreaser for the elimination of mineral and hydrocarbon oil and grease from all surfaces. Suitable for manual and automatic scrubber applications, both highand low-pressure.
 

Remarks

Concentrate Industrial Cleaner cum degreaser. is most popular in Navy, Railaways and heavy industries to clean heavy deposited grease mud and carbon.

Note

Can be diluted with fresh / Sea water

Handling: For the complete recommendations relating to the product handling and elimination precautions, please consult the corresponding Safety Data Sheet. For use by trained professional staff only.
  • Storage: Keep the product in its original closed. 
  • packaging. Do not expose the product to extreme cold.
Product Propertes
Appearance / odour .............................. Clear yellowish liquid / Mild Perfumed
Chemical Nature .................................... Mixture of Cationic Anionic
pH .........................................................  On 2% Dilution 7.8 to 8.5
Boiling point ........................................... >NA
Ignition temp .......................................... >NA
SOLUBILITY .......................................... Emulsifiable with water / soluble in most solvents

Shop Floors:

This multi-purpose cleaner and degreaser contains a high quality butyl combined with special detergents and builders for superior performance in hot or cold water. Aqueous pH Degreaser Conc.  B F E Conc  contains a special rinse additive and special anti-depositing agents to clean and rinse without leaving a residue. When using Aqueous pH Degreaser Conc.  B F E Conc  dilute in warm or hot water for best performance. Spray brush or mop on, and allow the cleaner to penetrate and loosen deposits, then flush away with a clean water rinse.Aqueous pH Degreaser Conc.  B F E Conc may be diluted from 1 part Aqueous pH Degreaser Conc.  B F E Conc  to 200 parts water. For greasy shop floors dilute 1 part to 5 parts water. If using a floor machine -Aqueous pH Degreaser Conc.  B F E Conc  may be diluted 1 part to 25 parts water. Remove difficult or hard deposits by allowing the Aqueous pH Degreaser Conc.  B F E Conc  solution to saturate for approximately five minutes, rub gently with stiff brush and rinse.

Equipment :

For degreasing equipment and greasy parts dilute Aqueous pH Degreaser Conc.  B F E Conc 1 part to 15 parts water.  Spray on surface and let product work for 5 to 8 minutes then rinse with high pressure wash or steam cleaner. Aqueous pH Degreaser Conc.  B F E Conc also works well in a hot soak tank. This product is an amazing cleaner / degreaser.

When using Aqueous pH Degreaser Conc.  B F E Conc. use though a proportioning device if possible. This will make the product go farther because it will always be used properly.  Try this product! It is a labor saver and cost cutter, and people are amazed at the cleaning properties of Aqueous pH Degreaser Conc.  B F E Conc.

Use a solution of DEGREASER HEAVY DUTY in kerosene or other suitable petroleum solvent for a light cleaning operation, or use neat for heavily soiled parts. Soak items to be cleaned for at least 20 minutes and then rinse off with hot water.

For Daily and conventional uses it can be diluted  0.5 to 2%  while for Occasional use dilute from 2 to 5%

 

Dilution Rates:

Degreasing action          :-  Make dilution 500 ml to 1 Ltr      with     4 to 5 Ltr WATER  ( This can be used as HEAVY DUTY DEGRESER )

Rigwash                        :-  Make dilution 500 ml to 1 Ltr   with         8 to 10 Ltr WATER ( This can be used as HEAVY DUTY RIG WASH  )
                                          And for General Purpose Rigwash dilution can be done up to 20 Ltrs

Dispersant                    :-  Make dilution 500 ml to 1 Ltr       with      20-25 Ltr WATER ( This can be used as Oil spill Dispesant )

Cutting Oil                    :-  Make dilution 500 ml to 1 Ltr     with   70 to100 Ltr WATER ( This can be used as Cuttings Wash Fluid  )

Garment / Laundry wash:-  Make dilution 500 ml to 1 Ltr  with 200 to 250 Ltr WATER ( This can be used as Laundry Wash  ) 
 

Soaking and impregnation of the surfaces with the solution at the dosage recommended below with mechanical cleaning action (automatic scrubber – low- and high-pressure systems) Can also be applied in automatic scrubber washing in direct passage - the equipment for the machine will have to be selected according to the type of floor (discs or brushes)

Copyright © 2021 Powered By MUSCAT AND BARKA BUSINESS TRADING - All Rights Reserved