Carbon Remover Cleaner HD

CARBON REMOVER is a heavy duty solvent based cleaner used undiluted for stubborn carbon deposits, residual combustion products carbon, grease, oil, varnishes and other heavy deposits from diesel engine. Extremely high solvency and penetrating capabilities to remove carbonaceous residue formed by fuel and other petroleuium based product. RXSOL-16-1003-020 is a highly concentrated Wetting Emulsifying Agent.Specifically formulated for removal of completely carbon, grease, oil, varnishes and other heavy deposits from diesel engine
This powerful action is based on a two – Layer mechanism. The top-layer prevents the evaporation of the volatile components in the button-layer. The button –layer removes the deposited substances. This way, the deposits are bind and trapped resulting to complete and safe removal.

Highly concentrate carbon cleaning product manufacturer and supplier for Marine Shipping and heavy Industries. We are one of popular supplier of Carbon Remover in Visakhapatnam - vizag, Gnagavaram, Chennai, Mumbai, GOA, Manglore, Goa, Kandla, Mundra, Sikka, Kolkata, Haldia, Pirpav, Dubai, Sharjah, Fujairah.

For removal of carbon deposits it must be used concentrated ,contained in a steel immersion bath.

SAFETY AND HANDLING:- Completely  Avoid contact with eyes as irritation may occur. Do not take internally. In case of contact with eyes, flush eyes immediately and cupiously with clean running  water for 15- minutes and seek medical attention.
 

Dosage

Depending upon the contamination deposition either concentrated or diluted.

Dilution : Use 1 part concentrate to 2-10 parts of water to yield a very effective end product. The components and machine parts are then dipped into the solvent / solution for 30 min. to 1 hr. Heavy deposition may need 12-24 hours , parts must be taken out from the bath and washed thoroughly with a high- pressure water supply jet system.

Conncentrated : RXSOL-16-1003-020 Carbon Remover Cleaner is most effective product in its category due to its quick and complete action.  Concentrated Carbon Remover can be applied for cleaning of highly soiled components on blocks, gear boxes, pistons, rings, valves, atomizers, pipes, burners, coolers, cylinder heads, injectors, tubes, oil filters , old paint and lacquers ), Finally can be rinse with water or Wipe off. 

Notes

Non- evaporation prevents loss of chemical.

CHARACTERISTICS :-

• Unique chemical formulation with corroision inhibitor
• Non- toxic
• Extends time between cleans.
• Effective removal of STICKER/CARBON DEPOSITS , completely heavy carbon, grease oil, varnish and other deposits as well as old paints, resins and lacquer coatings
• Can be applied by all normal methods.
• Formulated to be very cost effective.
• Does not contain chlorinated hydrocarbons.
• Can be used on all metals & most painted surfaces.
• 100% Active.
• Dries Completely.
• Does not require special feeding equipment for safe application.
• Reduce downtime and maintenance costs.

Precautions

During maintenance Engine decarbonisation is one of important steps. Our Carbon remover fluid products not only saving engine decarbonising cost but also helps to clean all types of sludge deposits. 

RXSOL carbon remover is best Solution for Internal Engine Cleaning and Maintenance also helps to clean  clog oil passages, and the chemical will also effectively clean piston rings, filter, Disc etc.

The engine room is the heart of any vessel, responsible for the propulsion and essential power systems that keep the ship running smoothly. Proper engine room maintenance is critical to ensuring safety, efficiency, and regulatory compliance. At RXMARINE International, we specialize in providing high-quality marine chemicals that enhance maintenance procedures, keeping vessels in top condition.

Why Engine Room Maintenance Matters

• Prevents Downtime & Costly Repairs: Regular inspections help detect early signs of wear and tear, reducing expensive breakdowns.

• Enhances Fuel Efficiency: A well-maintained engine operates efficiently, cutting down fuel consumption and operational costs.

• Ensures Crew Safety: Proper maintenance minimizes the risk of hazardous incidents such as fires, leaks, or mechanical failures.

• Regulatory Compliance: Compliance with international maritime regulations (IMO, SOLAS) is essential to avoid fines and ensure smooth sailing.

Key Aspects of Engine Room Maintenance

1. Cleaning & Degreasing

The accumulation of oil, grease, and dirt can lead to overheating and reduced efficiency. Using RXMARINE’s Engine Room Cleaners & Degreasers, you can effectively remove sludge, carbon deposits, and oil residues.

2. Lubrication System Maintenance

• Regular oil changes using high-quality marine lubricants help prevent friction and wear.

• Monitoring oil viscosity and contamination is crucial to detect potential engine issues early.

3. Cooling System Efficiency

• Scale and corrosion in heat exchangers and cooling lines reduce efficiency. Descaling chemicals like RXMARINE’s RXSCALE help prevent blockages and maintain optimal cooling.

• Ensure coolant levels are checked regularly to prevent overheating.

4. Fuel System Treatment

• Fuel contamination with water, sludge, and microbial growth can affect engine performance. Using fuel additives and biocides prevents clogging and improves combustion efficiency.

• Regularly clean fuel injectors and filters to maintain smooth operation.

5. Bilge Cleaning & Oil Spill Management

• The bilge area accumulates oil and sludge, which can pose environmental and safety hazards.

• RXMARINE’s Oil Spill Dispersants & Bilge Cleaners effectively break down oil and prevent pollution.

6. Corrosion Prevention

• Saltwater exposure accelerates corrosion in pipes, tanks, and metal surfaces.

• Apply corrosion inhibitors and protective coatings to extend the life of engine room components.

Best Practices for Engine Room Maintenance

• Implement a Routine Inspection Schedule – Daily, weekly, and monthly checks help identify problems early.
• Train Crew Members – Ensure engineers and crew are well-trained in maintenance procedures.
• Use High-Quality Marine Chemicals – Investing in premium cleaning, degreasing, and protective products ensures longevity and efficiency.
• Document Maintenance Activities – Keeping detailed logs helps in audits, repairs, and regulatory compliance.

Useful area

Engine Room Maintenance Chemicals covers full maintenance chemicals for SHIP engine and deck cleaning. We are major supplier of  Decontamination Cleaners, Petrol Chemical, Tank Cleaning, Institutional Degreasers,  Pressure Wash cleaner, Metalbright, Electrical cleaner, Pipe and Tank cleaning detergent chemicals, Sludge removers cleaner etc ...

Industrial area

Carbon Remover is most commonly used in Marine Engine Maintenance, Power Plant engineering section, Automobile Sector etc.
 

Supply location

Ship maintenance chemicals Carbon Remover cleaner supplier ship chandler in Mumbai - JNPT - pirpav, Kandla - Gandhidham, Chennai - Ennore, Visakhapatnam, Kolkata, Haldia, Paradip,  Manglore, Goa, Fujairah, Dubai, Sharjah, Abu Dhabi, Sohar Muscat Oman, Canada

Generic name

Keywords

#Carbon_Remover
#Carbon_Cleaner
#CarbonRemoverCleaner_Supplier
#CarbonRemoverCleaner_Manufacturer

Best way to clean carbon deposits using RXSOL Carbon Remover

1. Preparation & Safety

Before applying the product:

• Wear appropriate PPE: chemical-resistant gloves, eye protection and protective clothing.
• Ensure the parts are accessible and free of loose debris.
• Work in a well-ventilated area.
  Safety: Avoid direct contact with eyes and skin; rinse thoroughly with water if contact occurs.

2. Surface Pre-Inspection

Identify the level of carbon build-up:

• Light deposits: Minimal soot or thin layers.
• Heavy deposits: Thick, baked-on carbon, coked residues or varnish.
• Heavier build-ups require longer exposure or higher concentration solutions.

3. Dilution & Application Method

Dilution Options:

• Concentrated use: For very heavy carbon and tenacious deposits, use the product undiluted.
• Diluted use: Mix 1 part concentrate with 2 to 10 parts water depending on severity.

Application Techniques:

A. Immersion Bath Method (Recommended):

Prepare a steel immersion bath with the chosen concentration.

Fully submerge the parts or components in the solution.

Allow soaking for 30 minutes to 1 hour.

Very heavy deposits: May require 12–24 hours of immersion.

After soaking, remove parts and rinse thoroughly with high-pressure water to wash away loosened carbon.

B. Circulation Method (For Large Assemblies):

Set up a circulation drum where the solution can flow over surfaces (e.g., heat exchanger tubes).

Maintain circulation for 10–12 hours to fully penetrate oily carbon build-up.

Rinse system with high-pressure water until the rinse water runs clear.

Allow surfaces to air-dry.

4. Enhanced Performance Tips

• Warm Solution: Heating the solution to 30–40 °C can accelerate dissolving action and reduce cleaning time.
• Agitation: Gentle agitation or circulating flow helps penetration into hard-to-reach areas.
• Repeat Treatment: For extremely stubborn carbon, a second treatment may be needed.

5. Post-Cleaning Care

Once decarbonization is complete and rinsed:

• Inspect the surface for residual deposits.
• Dry thoroughly to prevent corrosion or flash rusting.
• Reassemble components following normal maintenance procedures.

Using the RXSOL Carbon Remover correctly through proper dilution, immersion or circulation, sufficient contact time and thorough rinsing ensures effective decarbonization of engine parts, heat exchangers and other machinery surfaces. This chemical approach minimizes manual scraping, reduces surface damage, and extends component life while improving operational performance.