RO Antiscalant Aquatec 3000 Manufacturer and supplier in Mumbai, Dubai, Muscat, Nairobi, Kenya, Gandhidham, Surat, Chennai, Visakhapatnam, Sharjah, Ajman, Abudhabi, UAE, Ruwi Barka, Sohar, Kolkata, Paradip, Sudan, Yemen
MUSCAT CHEMICAL TAG::
RO Antiscalant Aquatec 3000 is a powerful, broad spectrum, liquid antiscalant and dispersant that is compatible with organic coagulants. It is highly effective at low dose rates and in a wide range of feedwaters.
Future , Performence and Benefit ::
Powerful against these and other types of scale:
Calcium Carbonate
CaCO3
Barium Sulfate
BaSO4
Calcium Sulfate
CaSO4
Strontium Sulfate
SrSO4
Calcium Fluoride
CaF2
Silica
SiO2
- Formulated with a crystal modification property that distorts inorganic salt crystal growth to reduce system fouling.
- Compatible with polyelectrolyte coagulants.
- Economical to use, offering threshold scale inhibition at low dose rates.
- Highly effective in a wide variety of feedwaters and pH ranges.
SPECIFICATIONS:
Appearance
: Clear,amber liquid
pH (as supplied)
: 10.7-11.8
Specific gravity (@25°C)
: 1.2-1.3
RO Antiscalant Aquatec 3000 is a multicomponent antiscalant that prevents scale precipitation and disperses colloidal particles in cellulose acetate and polyamide membrane systems. It is compatible with organic coagulants that may be indirectly present in municipal feedwaters or directly present as a result of coagulation or flocculation treatments upstream of the reverse osmosis (RO) system. Other applications for this product include seawater and brackish water for the production of potable and industrial waters.
INSTRUCTIONS FOR USE
Injecting
Best results are achieved when RO Antiscalant Aquatec 3000 is injected downstream of multimedia filters and upstream of cartridge filters.
Dosing
A typical RO Antiscalant Aquatec 3000 dose ranges from 2-5 mg/l. A site-specific dose can be determined using the technical software program.
Dilution
RO Antiscalant Aquatec 3000 is formulated to be injected neat. However, if dilution is required, use deionized (DI) water or RO permeate. If neither of these is available, softened water may be substituted. The dilution for RO Antiscalant Aquatec 3000 should not result in a solution strength of less than 1%, and DI-quality water must be used for any dilutions below 10%. This guideline protects the effectiveness of the internal bacteriostat, which inhibits bacterial growth in the product packaging and feed tank.
