SEA POWER CLEANER Degreaser Plus supplier in Mumbai, Surat, Gandhidham - Kandla Deen Dayal Port, Sikka - Jamnagar, Manglore, Goa, Chennai - Ennore, Visakhapatnam - Gangavaram, Kolkata - Haldia, Paradip, Fujairah, Sharjah, Abu Dhabi, Dubai, Muscat Sohar Oman Barka, Navi Mumabi MIDC, Canada
MUSCAT CHEMICAL TAG::
SEA POWER CLEANER Degreaser Plus Manufacturer, supplier and Exporter. Specially formulated for cleaning of double bottom, deep and wing tanks etc, used for fuel oils. It can also be used for local cleaning and degreasing of deck and engine rooms. Its strong emulsifying nature completely makes fuel oils miscible with water due to that It's application field increases as strong cleaner for BOILERS, MARINE DIESEL ENGINE COOLING WATER SYSTEM and for local cleaning and degreasing of engine rooms on deck. This product is also popular used on oil installations, workshops, plant yards, industrial plants as degreaser and cleaner.
#Sea_Cleaner
#Seacleaner_IndiaUAEoman
#sea_cleaningCHEMICALS
RXSOL-20-2027-025 is an effective liquid blend of modern low toxic, biodegradable solvent, concentrated emulsifier with penetrating agents, mild abrasives and wetting agents which makes this an excellent liquid scouring cleansers for cleaning and degreasing action which makes useful for Cargo tank cleaning after drying, semi-drying. And non-drying natural oils and fats. Saponifying and detergents.
Similar familly group of this product is Tank cleaner Plus, New ORG, SEA POWER CLEANER Degreaser Plus, Tank cleaner.
Highly effective concentrated cleaner .
Versatile, can be used for a wide application range ( for TANK or general cleaning .)
Provides quick and thorough emulsifying action.
Can be used for cleaning , gas freeing of double bottom, deep and other fuel oil bunker tanks.
May also be used for cleaning and gas-freeing of crude and refined mineral oil cargo tanks.
It can be used as a general purpose cleaner to remove oil and grease deposits and cleaning of bilge spaces and engine rooms from soiled surfaces. Can be used for degreasing and cleaning engine cooling water systems
|
Dosage Chart for Rock and Roll Cleaning |
||
|
Fuel Oil Viscositry Centistokes at 50°C |
RXSOL-20-2027-025 / 1000 Ltsof water |
|
|
|
1st Stage |
2nd Stage |
|
Over 320 and sludge tanks |
1 litre |
1 litre |
|
150 - 300 |
1 litre |
0.75 litre |
|
Up to 50 |
0.5 litre |
… |
|
Physical Properties |
||
|
Colour |
Light Brown Liquid |
|
|
Density |
In g/cm3 at 15°C: 0.9 |
|
|
Flash Point |
Above 70 °C |
|
|
PACKAGING |
Order No RXSOL-20-2027-025 |
Size (in litres) 20, 25, 35, 210. |
During our working field experience, we observed that SEA POWER CLEANER Degreaser Plus Plus product also works as the powerful cleaner to dissolve stain of PET COKE, Presence of small quantities of SEA POWER CLEANER Degreaser Plus can enhance cleaning action of pet-coke from ship bulk cargo hold. Simply spray SEA POWER CLEANER Degreaser Plus on a heavily contaminated area of PET COKE and then use other ship hold cleaning chemicals like RX Tuff alkaline cleaner to complete hold cleaning process.
Directions for Use and Dose Rates
RXSOL-20-2027-025 is specially formulated for cleaning double bottom, deep and wing tanks etc, used for fuel oils. It can also be used for local cleaning and degreasing of engine rooms and on deck.
Soak Method
For heavy soil put parts into undiluted RXSOL-20-2027-025, for general soiling use a solution of 10-30% RXSOL-20-2027-025 in water. Parts should be soaked for at least 30 minutes before washing off with water.
Spraying Method
Use neat RXSOL-20-2027-025 over all soiled areas. Allow 10-20 minutes for reaction , then rinse with high pressure water hose., Scrubbing will assist the cleaning operation for stubborn deposits.
Rock and Roll Method
Recommended time to clean and gas-free under normal circumstances would be 3-6 days ,for cleaning of double bottom tanks at sea.
1) First of all heat the remaining oil in tanks .
2)By stripping constantly. flush the tank with sea water,
3) Close all suction and discharge valves .
4) 1st Dose Fill the tanks by ½ to 1 litre RXSOL-20-2027-025 per tone of water through pipe or manhole , for 75-80% of capacity of tank to be cleaned.
5) Then fill tank to 25% capacity with sea water, raise the temperature up to 60°C maximum, and maintain this temperature for 24 hours.
6) Top up tank to 75-80% capacity with sea water, continue to heat for 48 to 72 hours.
7) Discharge and strip tank. Fill to 50-60% capacity with sea water and allow 2 hours rinsing time.
8) Discharge tank and strip, flushing tank with sea water for 2 hours,stripping continuously. When completed, inspect tank to ascertain if second cleaning is required. If so:
9) For completion add second dose of RXSOL-20-2027-025, fill tank with sea water 75-80% capacity and raise the temperature to 60°C maximum. Maintain this for 48 to 72 hours. And recirculate the solution .
10) Discharge and strip tank, flush with sea water, stripping continuously for 2 hours.
11) To gas-free, fill tank with sea water to overflow through vents and sounding pipes, discharge and strip completely.
SEA POWER CLEANER Degreaser Plus most common degreaser in Shipping marine Industries. In shipchandling line SEA POWER CLEANER Degreaser Plus is such a popular degreaser, no one need its eplanation about its uses. SEA POWER CLEANER can be utilized directly on metal surface or this can be diluted with water for light weight cleaning. Popularity of SEA POWER CLEANER Degreaser Plus is only due to its multi function properties. All Engineering section maintenance can be controlled by SEA POWER CLEANER Degreaser Plus most common tank cleaner for lube oil / any petro solvent carrier.
SEA POWER CLEANER Degreaser Plus is powerfull solvent based degreaser. SEA POWER CLEANER easily penetrate oil greasy mud and also breakes the Carbonacious deposits.
