Disc Separator Clean
For the latest, most accurate MSDS, email us at muscatchem @ gmail.com.
RXSOL-16-1007-025 is a liquid blend of organic solvent with heavy duty & concentrated emulsifying Acidic agents , which is developed for cleaning stainless steel separator & purifier Discs . An extremely effective for removal of SALT DEPOSITION ( Salts of Calcium Carbonate etc. ) burnt grease , carbon deposit , oily residues and lacquers found in fuel oil and lube oil purifiers and filters. NOTE:- Mechanical cleaning ( Scrubbing and Brushing ) damage to discs which results in poor performance.
Characteristics:- Disc Separator Clean formulated to remove heavy tenacious deposits. Allows cleaning of discs without dismantling of disc stacks. Reduces downtime. Improves efficiency of centrifuge installation. Cleans down to metal surfaces. Cleans all types of separator discs
Key facts
- Product
- Disc Separator Clean
- Part No.
- RXSOL-16-1007-020
- Category
- Deck cabin galley Maintenance
- Also known as
- Ameroid DC, Careclean Separator, Eazy Disclean, SI-314, F 145
- Supplier
- Muscat Chemical, Barka, South Al Batinah, Oman
- Delivery
- Muscat, Sohar, Salalah, Duqm, Nizwa, Sur, Barka and Gulf ports
- Documents
- MSDS (PDF); TDS on request
- Pricing
- Quote on request — contact us or WhatsApp +968 77333599
FIELDS:-
A very fast & effectively removes without the need of Scrubbing and Brushing of Centrifugal Separators, Disc & all types of heavy tenacious deposits which collect in fuel & lube oils centrifugal separators disc stacks.
Flash point cc : None
IMO-Code : 8-2031-T700.
NATURE OF SPECIAL RISKS AND SAFETY ADVICE
In accordance with the latest E.E.C. Council directives:
R 36 : Irritating to eyes and skin.
S 2 : Keep out of reach of children.
S 28 : After contact with skin rinse immediately with plenty of water.
Dosage
For General cleaning it Should be diluted ,at the rate of 1-parts RXSOL-16-1007-025 to 5-parts water,( Or 1:1 ratio of any solvent like diesel ) before use or depend on nature of dirt / contamination . For Heavy deposition , immerse the stainless Steel DISCS in the container with concentrated RXSOL-16-1007-025 for 15 minutes to 3 Hrs. At 50 to 60°C ( Heating is not necessary ) .
After the unit or parts have been satisfactorily cleaned, remove the discs by using RUBBER GLOVES and rinse thoroughly with fresh water. It is recommended that this product is not used on soft metal, Zinc,Tin, Galvanized surfaces or Anodized Aluminium. Then separator discs can be used immediately.
NOTE:-
Recirculation and heating will improves the cleaning action.
Supply location
Disc Separator Clean supplier in Mumbai, Chennai, Vizag Visakhapatnam, Kandla Gandhidham, Kolkata Haldia, Paradip, Manglore, Goa, Surat Hazira, Fujairah, Dubai, Sharjah, Ajman, Dubai, Muscat Oman, Canada BC