Carbon Remover Powder
Powder mix in tank where the utensil and wa
MSDS not yet available online for this product — email us at muscatchem @ gmail.com and we'll send you a copy.
The powder is an environmentally safe cleaning agent that is non-caustic, non-toxic, fully biodegradable, Specifically formulated for removal of completely carbon, grease, oil, and other heavy deposits.
Powder mix in tank where the utensil and wares are soaked to remove the carbon. The deposits are bind and trapped resulting to complete and safe removal.
CARBON cleaner is very active which eliminates the need for Scrubbing or Brushing which can cause mechanical damages to Utensils and PARTS
| Product Name RXSOL-15-1003-925 | ||
| Active Mater | 93-98% | |
| Consistency | Powder | |
| Emulsifying Property | Good for emulsification of Oils , Gum , Wax, Carbon Greases , Polymer & Solvents , | |
| Wetting Property | Good Wetting & Emulsifying Property | |
| pH | Alkaline 10-11 | |
| Boiling Point | Powder form – No boiling point | |
| Melting Point | Powder form – No melting point | |
| Colour | Pale Yellow | |
| Appearance | White Powder | |
| Odour | Characteristic | |
| Moisture | 0.5 % (max) | |
| Density | In g/cm3 at 15°C: 1.06 | |
| Flammability | Non flammable - will give off poisonous gas in a fire. | |
| Compatibility | ||
| Metal | No known effect | |
| Rubber | May swell | |
| Synthetic rubber | May swell | |
| PACKAGING | Order No | Size (in Kg) |
| RXSOL-15-1003-925 | 5,25 | |
|
Auto Flammability: Nil
Explosive Properties: Non-explosive
Oxidizing Properties: Non-oxidising
Solubility:Water: Soluble
|
Vapour Pressure: at 20 degrees C - 29.9 mbar
Density: (Air = 1) = > 1.0
Solubility:Solvent: Insoluble
|
Solubility:Coefficient: N/A
Neurotoxicity: Slightly Toxic LD50 0.5 – 5g/kg
|
For removal of carbon deposits it must be used concentrated ,contained in a steel immersion bath.
SAFETY AND HANDLING:- Completely Avoid contact with eyes as irritation may occur. Do not take internally. In case of contact with eyes, flush eyes immediately and cupiously with clean running water for 15- minutes and seek medical attention.
Dosage
Depending upon the deposition either concentrated or diluted. If used diluted use 1 part concentrate to 2-10 parts of water to yield a very effective end product. The components parts are then dipped into the solvent / solution for 30 min. to 1 hr. Heavy deposition may need 12-24 hours , parts must be taken out from the bath and washed thoroughly with running water.
Carbon remover is most effective product in its category due to its quick and complete action. can be applied for cleaning of highly soiled components.
Useful Area
Carbon Remover concentrate heavy duty Powder based formula easily cleans stubborn carbon deposits.
Industrial Usage
CARBON REMOVER also works as degreaser so its presence helps to avoid storage of multiple maintenance cleaning chemicals like degreaser, liquid detergent etc. Carbon remover Powder helps to clean oil carbon deposits mixture with water helps to degrease oil greasy from metal surface. Carbon Remover is a special product produced to remove deposits like carbon, grease, oil, varnishes from PARTS and Utensils.
Remarks
Supply Locations
Carbon Remover manufacturer and supplier in Navi Mumbai MIDC, Taloja, Mahape, Turbhe, Crawford Market Masjid Bunder Princess Street Mumbai, Kandla Gandhidham, Mundra, Jamnagar, Sikka Rozy port, Hazira Surat, Visakhapatnam, Gangavaram, Chennai Ennore, Kolkata, Haldia Howrah, Paradip Odisha, Fujairah Dubai Sharjah Abudhabi, Ajman, Ghala, Muscat Barka Oman
Carbon Remover standard packing with new generation formulation available in 5 kg and 25 kg packing.