Specially designed to rapidly break pipes to restore flow and clear blockages. Heavy DUTY and fast effective Descaler for any type of metal (except for soft metal like aluminium and zinc). This scales remover for sewage pipe lines and evac systems . It contains special inhibitors to make its after on most metals, concrete and plastic surfaces. Drain Blaster cuts down the need to plumb or rod, or excavate when the build-ups occur.
OTHER NAME : BLOCKED PIPE CLEANER, PIPE-CLEAN, DRAIN PIPE CLEANER
Directions for Use and Dose Rates :-
The most effective method is circulation for large systems or components likeboilers, evaporators, condensers, heat exchangers and generally closed systems that have the capability to circulate at a temperature of approximately 40-60°C, for 6-12 hours and solutions of 10-40% of Drain Scale Remover in water. Keep in mind that the strength of the solution is analogous to the degree of deposition of scale .
In case of small components , the soak method in an immersion bath can be used. If the equipment to be cleaned is contaminated by oil, grease, sludge or carbonized oil, then first of all clean the system with RXSOL OB 1005.
Drain Scale Remover should be mixed with fresh water to form a solution of 10-30%, depending on the extent of scaling.
After using Drain Scale Remover it is essential to thoroughly rinse all metal surfaces at least once with a 0.5% solution of Alakleen Liquid or Liquid Soap in fresh water. This solution should be circulated for 2-4 hours or until an acceptable pH value is obtained. This will neutralize any remaining acidity & passivate steel surfaces. Drain Scale Remover should not be used on Aluminium, Zinc, Tin, or any Galvanized Surfaces for which a special grade cleaner should be used.
STORAGE PRECAUTIONS
Store in tightly closed original container in a dry and cool place.
HEALTH AND SAFETY
Health and Safety Data sheet available separately.
DIRECTIONS FOR USE
1. For professional use only.
2. Read the label and MSDS carefully before use.
3. Wear appropriate protective clothing, gloves and eye/face protection.
4. DO NOT MIX WITH BLEACH or other cleaning chemicals.
5. Do not apply if the toilet/drain is overflowing. Remove excess fluid where appropriate.
6. Assess where the likely source of the blockage is. If the drain is totally blocked with no flow and the blockage is too far away, Blockbuster would not be an appropriate treatment and a qualified drainage engineer/plumber should be contacted.
DRAIN PIPE CLEANER Supplier Oman Muscat Barka Salalah Sohar Ruwi Mutrah Nizwa Al Hamra Manah
Email:- mail@muscatchemical.com
